Datasets:
OrganizedProgrammers
/
ETSISpecContent

Dataset card Data Studio Files
xet
Community
1
hash
stringlengths
32
32
doc_id
stringlengths
7
13
section
stringlengths
3
121
content
stringlengths
0
2.2M
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.1.4.2 Test Applicability
This test is applicable according to the following PICS parameters. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 58 Table 8.1.1.4.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_rds Support RD selection for association m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.1.4.3 Pre-Test Conditions
Prerequisite tests: • Transmission on Random-Access Resources • Association Request and Release Test System: • Configuration: CF05 EUT: • Mode: PT Preamble: • The EUT is switched off PIXIT parameters: Table 8.1.1.4.3-1: PIXIT parameters PIXIT parameter Description Status px_min_sensitivity_level RD sensitivity level in dBm m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.1.4.4 Test Procedure Sequences
Table 8.1.1.4.4-1: Test System RSSI-2 configuration Type LT Target RSSI-2 level of beacon transmissions at EUT input (dBm) T1 FT1 px_min_sensitivity_level + MIN_QUALITY + 10 dB + PowerMargin FT2 px_min_sensitivity_level + MIN_QUALITY - 10 dB - PowerMargin PowerMargin is the sum of the RSSI-2 Measurement accuracy (positive value) and the error caused by the RSSI-2 measurement report mapping as defined in ETSI TS 103 636-2 [2] on clause 8.3. NOTE 1: MIN_QUALITY is signalled in the Cluster Beacon IE. NOTE 2: When setting the PowerMargin the TS should consider its own transmission output power tolerance to ensure the correct power level at the input of the EUT. Table 8.1.1.4.4-2: Test System Route Cost Configuration Type LT Route cost T1 FT1 Not present or 1 FT2 Not present or 1 ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 59 Table 8.1.1.4.4-3: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS (FT1 and FT2) transmit Cluster beacon messages, with values according to row "T1" in Table 8.1.1.4.4-1 and row "T1" in Table 8.1.1.4.4-2. <-- Cluster Beacon message - - 2 EUT is switched on. - - - - 3 Check: Does the EUT transmit an Association Request message to FT1? --> Association Request message 1 P 4 The TS (FT1) transmits an Association Response message as a random-access response, indicating ACK. <-- Association Response message - -
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.2 Broadcast Procedure
Void.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3 Random Access Procedure
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1a Transmission on Random-Access resources received from beacon message
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1a.1 Test Purpose
Table 8.1.3.1a.1-1: Test Purpose to sequence mapping Test Name Reference TP Transmission on random-access resources received from beacon message 7.1.3.1.1a 1
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1a.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.3.1a.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_rach_tx Support Random Access Transmission m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1a.3 Pre-Test conditions
Prerequisite tests: • None Test System: • Configuration: CF03 EUT: • Mode: PT Preamble: • The EUT is switched on ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 60
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1a.4 Test Procedure Sequence
Table 8.1.3.1a.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits periodic Cluster Beacon messages. <-- Cluster Beacon message - - 2 Command the EUT to transmit a packet to the TS. - - - - 3a Check: Does the EUT transmit the packet to the random-access resources? --> MAC PDU 1 P 3b The TS transmits a random-access response within random-access response window. - - - -
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1b Transmission on Random-Access resources received in unicast message
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1b.1 Test Purpose
Table 8.1.3.1b.1-1: Test Purpose to sequence mapping Test Name Reference TP Transmission on random-access resources received from unicast signalling 7.1.3.1.1b 1
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1b.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.3.1b.2-1: PICS selection parameters PICS Selection Description Status pc_smcb Smart Metering, City and Buildings m pc_mac_ft FT mode m pc_mac_rach_tx Support Random Access Transmission m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1b.3 Pre-Test conditions
Prerequisite tests: • Random Access Reception and Response Test System: • Configuration: CF02 EUT: • Mode: FT Preamble: • EUT in FT mode associated to another RD, according to Table 8.4.2.2-1 ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 61
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.1b.4 Test Procedure Sequence
Table 8.1.3.1b.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The EUT transmits a Cluster Beacon message. --> Cluster Beacon message - - 2 The TS transmits a Data Request message indicating: request_flags: 0x80 (HARQ), request_t_interval: 0x13 (1 second), request_n_packets: 0x0A (10 packets), request_n_bytes: 0x000a (10-byte data payload). <-- TMC: Data Request - - 3 The EUT transmits a random-access response. --> - - - 4 Check: Does the EUT transmit a packet containing Data Request Response message? --> TMC: Data Request Response 1 P 5 The TS transmits a random-access response within random-access response window. - - - - NOTE: The EUT should not transmit a Data Request Response message within the random-access response due to the delay.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.2 Listen Before Talk
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.2.1 Test Purpose
Table 8.1.3.2.1-1: Test Purpose to sequence mapping Test Name Reference TP Listen Before Talk 7.1.3.1.2 1
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.2.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.3.2.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_rach_tx Support Random Access Transmission m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.2.3 Pre-Test conditions
Prerequisite tests: • Transmission on Random-Access Resources • Association Request and Release Test System: • Configuration: CF03 EUT: • Mode: PT Preamble: • EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • Test mode on ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 62 Table 8.1.3.2.3-1: Interference signal properties Type Parameter Value Remark 1 Bandwidth B Nominal channel bandwidth Power level at EUT input P RSSI_THRESHOLD_MAX + InterferenceMargin Centre frequency Centre of the operating channel of the EUT Set to a single channel Duty cycle 100 % Continuous interference NOTE 1: RSSI_THRESHOLD_MAX is set to value defined for the band where the test is performed. NOTE 2: InterferenceMargin as defined in Table 8.1.1.2.4-1.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.2.4 Test Procedure Sequence
Table 8.1.3.2.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits periodic Cluster Beacons. <-- Cluster Beacon message - - 2 The TS transmits a Data Request message indicating: request_flags: 0x00 (No HARQ), request_t_interval: 0x13 (1 second), request_n_packets: 0xff (continuous), request_n_bytes: 0x000a (10-byte data payload). <-- TMC: Data Request - - 3a The EUT transmits a Data Request Response message. --> TMC: Data Request Response - - 3b The TS transmits a packet as a random-access response. <-- - - - - EXCEPTION: The steps 4 to 7 are repeated for 10 times. - - - - 4 The TS transmits an interference signal according to field "Type 1" in Table 8.1.3.2.3-1. - - - - 5 Check: Does the EUT transmit a packet (containing Data Request Response message) within 2 seconds? --> TMC: Data Request Response 1 F 6 The TS stops transmitting interference. - - - - 7a Check: Does the EUT transmit a Data Request Response message within 1 second after removing the interference in step 6? --> TMC: Data Request Response 1 P 7b The TS transmits a packet as a random-access response. <-- - - - NOTE: The interference power level is measured from the EUT transmission bandwidth at the EUT input.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.3 Random Access Data Transmission
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.3.1 Test Purpose
Table 8.1.3.3.1-1: Test Purpose to sequence mapping Test Name Reference TP Random access transmission length 7.1.3.1.3 1
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.3.2 Test Applicability
This test is applicable according to the following PICS parameters. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 63 Table 8.1.3.3.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_rach_tx Support Random Access Transmission m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.3.3 Pre-Test conditions
Prerequisite tests: • Transmission on random-access resources • Association Request and Release Test System: • Configuration: CF03 EUT: • Mode: PT Preamble: • EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • Test mode on
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.3.4 Test Procedure Sequence
Table 8.1.3.3.4-1: Test values for Max RACH Length Profile Max_RACH_Length Core 2, 4, 8, 12 (Slots) ETSI TS 103 874-2 [7] As defined in ETSI TS 103 874-2 [7], Table 7.3.4.3.4-1 Table 8.1.3.3.4-2: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits a Cluster Beacon indicating Max_RACH_Length as defined in Table 8.1.3.3.1-1. <-- Cluster Beacon message - - 2 The TS transmits a Data Request message indicating: request_flags: 0x80 (HARQ), request_t_interval: 0x13 (1 second), request_n_packets: 0x01 (1 packet), request_n_bytes: 0xffff (Maximum data payload size supported by the EUT). <-- TMC: Data Request - - 3a The EUT transmits a Data Request Response message. --> TMC: Data Request Response - - 3b The TS transmits a packet as a random-access response. <-- - - - 4 Check: Does the EUT transmit a packet indicating "Packet Length" less or equal to the "Max RACH Length" in step 3a? (see note) - - 1 P NOTE: The EUT may refrain from transmitting if it cannot fit any packet to the RACH resources. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 64
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4a Random Access Reception and Response (Announced in beacon message)
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4a.1 Test Purpose
Table 8.1.3.4a.1-1: Test Purpose to sequence mapping Test Name Reference TP Reception from random-access resources announced in beacon message and response 7.1.3.2.1a 1 Reception of other packets 7.1.3.2.2 2
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4a.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.3.4a.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode m pc_mac_rach_res_bea Support Random Access Resource announcement in beacon messages m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4a.3 Pre-Test conditions
Prerequisite tests: • Beaconing Transmission Test System: • Configuration: CF02 EUT: • Mode: FT Preamble: • EUT is switched on • EUT is commanded to transmit Cluster Beacon(s).
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4a.4 Test Procedure Sequence
Table 8.1.3.4a.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The EUT transmits a Cluster Beacon message. --> Cluster Beacon message - - 2 The TS transmits a packet on the random-access resources of the EUT. <-- MAC PDU - - 3 Check: Does the EUT transmit a random-access response within the RACH response window? --> RACH response 1 P 4 The TS transmits a packet indicating a different "Receiver Identity" from the EUT. <-- MAC PDU - - 5 Check: Does the EUT transmit a random-access response? --> RACH response 2 F 6 The TS transmits a packet indicating a different "Short Network Address" from the EUT. <-- MAC PDU - - 7 Check: Does the EUT transmit a random-access response? --> RACH response 2 F ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 65
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4b Random Access Reception and Response (Announced in unicast message)
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4b.1 Test Purpose
Table 8.1.3.4b.1-1: Test Purpose to sequence mapping Test Name Reference TP Reception from random-access resources announced in unicast message and response 7.1.3.2.1b 1 Reception of other packets 7.1.3.2.2 2
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4b.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.3.4b.2-1: PICS selection parameters PICS Selection Description Status pc_smcb Smart Metering, City and Buildings m pc_mac_pt PT mode m pc_mac_rach_res_uni Support Random Access Resource announcement by unicast signalling m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4b.3 Pre-Test conditions
Prerequisite tests: • Transmission on random-access resources • Association Request and Release Test System: • Configuration: CF03 EUT: • Mode: PT Preamble: • EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • EUT has signalled Random Access Resource IE within a unicast message ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 66
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.3.4b.4 Test Procedure Sequence
Table 8.1.3.4b.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits a packet on the random-access resources of the EUT. <-- MAC PDU - - 2 Check: Does the EUT transmit a random-access response within the RACH response window? --> RACH response 1 P 3 The TS transmits a packet indicating a different "Receiver Identity" from the EUT. <-- MAC PDU - - 4 Check: Does the EUT transmit a random-access response? --> RACH response 2 F 5 The TS transmits a packet indicating a different "Short Network Address" from the EUT. <-- MAC PDU - - 6 Check: Does the EUT transmit a random-access response? --> RACH response 2 F
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.4 Scheduled Access data transfer
Void.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5 HARQ Procedures
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.1 HARQ Transmission
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.1.1 Test Purpose
Table 8.1.5.1.1-1: Test Purpose to sequence mapping Test Name Reference TP Successful HARQ transmission 7.1.5.1.1 1 Redundancy version reset 7.1.5.1.2 2 Redundancy version increment 7.1.5.1.3 3 Max HARQ Re-Tx 7.1.5.1.4 4
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.1.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.5.1.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode o.1 pc_mac_pt PT mode o.1 pc_mac_harq_tx Support HARQ transmission m o.1: At least one of the features shall be supported.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.1.3 Pre-Test conditions
Prerequisite tests: • Mode FT: - Beaconing transmission - Transmission on Random Access Resources ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 67 - Random Access Reception - Association Response and Release • Mode PT: - Transmission on Random Access Resources - Random Access Data Transmission - Association Request and Release Test System: • Configuration: CF02 when EUT in FT Mode • Configuration: CF03 when EUT in PT Mode EUT: • Mode: FT or PT Preamble: • Mode FT: - EUT in FT mode associated to another RD, according to Table 8.4.2.2-1 • Mode PT: - EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • Test Mode on
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.1.4 Test Procedure Sequence
Table 8.1.5.1.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message - EXCEPTION: The steps 1a to 1b depend on the test parameters on whether the EUT operates in FT or PT mode. - - - - 1a IF EUT Mode = FT THEN the EUT transmits periodic Cluster Beacon messages. --> Cluster Beacon message - - 1b IF EUT Mode = PT THEN the TS transmits periodic Cluster Beacon messages. <-- Cluster Beacon message - - 2 The TS transmits a Data Request message indicating: request_flags: 0x80 (HARQ enabled), request_t_interval: 0x13 (1 second), request_n_packets: 0xff (continuous), request_n_bytes: 0x000a (10-byte data payload). <-- TMC: Data Request - - 3 The EUT transmits a packet containing PHY Header Type 2, indicating Header Format: 0. --> TMC: Data Request Response - - 4 The TS transmits a packet containing Transmission Feedback indicating ACK to indicate successful reception of the packet from step 3. <-- HARQ ACK - - 5 When: The EUT transmits a packet indicating the same HARQ process number as in step 3. (see note) --> TMC: Data Request Response 1 P ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 68 Step Procedure Message Sequence TP Verdict EUT-TS Message 5a Check: Does the packet transmitted in step 5 indicate "DF Redundancy Version": 0? - - 1 P 5b Check: Does the packet transmitted in step 5 indicate toggled "DF New Data Indication" compared to step 3. - - 1 P 6 The TS transmits a packet containing Transmission Feedback indicating ACK to indicate successful reception of the packet from step 5. <-- HARQ ACK - - 7 The EUT transmits a packet containing PHY Header Type 2, indicating Header Format: 0. --> TMC: Data Request Response - - 8 The TS transmits a packet containing Transmission Feedback indicating NACK to indicate unsuccessful reception of the packet from step 7, and requesting redundancy version reset to 0. (Feedback info format 6) <-- HARQ NACK - - 9 When: The EUT transmits a packet indicating the same HARQ process number as in step 7, and before timer Max HARQ Re-Tx expires. (see note) --> TMC: Data Request Response 2 P 9a Check: Does the packet transmitted in step 9 indicate "DF Redundancy Version": 0? - - 2 P 9b Check: Does the packet transmitted in step 9 indicate the same "DF New Data Indication" as in the packet in step 7? - - 2 P 10 The TS transmits a packet containing Transmission Feedback indicating ACK to indicate successful reception of the packet from step 9. <-- HARQ ACK - - 11 The EUT transmits a packet containing PHY Header Type 2, indicating Header Format: 0. --> TMC: Data Request Response - - 12 The TS transmits a packet containing Transmission Feedback indicating NACK to indicate unsuccessful reception of the packet from step 11. <-- HARQ NACK - - - EXCEPTION: Steps 13 to 14 are repeated until timer Max HARQ Re-Tx expires for the MAC PDU transmitted at step 11. - - - - 13 When: The EUT transmits a packet indicating the same HARQ process number as in step 11, and before timer Max HARQ Re-Tx expires. (see note) --> TMC: Data Request Response 3 P 13a Check: Does the packet transmitted in step 13 indicate the next "DF Redundancy Version"? - 3 P 13b Check: Does the packet transmitted in step 13 indicate the same "DF New Data Indication" as in the packet in step 11? - 3 P 14 The TS transmits a packet containing Transmission Feedback indicating NACK to indicate incorrect reception of the packet from step 13. <-- HARQ NACK - - 15 When: The EUT transmits a packet indicating the same HARQ process number as in step 11, and timer Max HARQ Re-Tx expires for the packet transmitted in step 11 (see note). --> TMC: Data Request Response 4 P 15a Check: Does the packet transmitted in step 15 indicate "DF Redundancy Version": 0? - - 4 P 15b Check: Does the packet transmitted in step 15 indicate toggled "DF New Data Indication" compared to step 11. - - 4 P 16 The TS transmits a packet containing Transmission Feedback indicating ACK to indicate successful reception of the packet from step 15. <-- HARQ ACK - - NOTE: The EUT is allowed to transmit packets indicating other HARQ process numbers in between. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 69
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.2 HARQ Feedback
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.2.1 Test Purpose
Table 8.1.5.2.1-1: Test Purpose to sequence mapping Test Name Reference TP NACK Feedback 7.1.5.2.1 1 ACK Feedback 7.1.5.2.2 2
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.2.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.5.2.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode o.1 pc_mac_pt PT mode o.1 pc_mac_harq_feedback Support HARQ feedback m o.1: At least one of the features shall be supported.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.2.3 Pre-Test conditions
Prerequisite tests: • Mode FT: - Beaconing Transmission - Random Access Reception - Association Response and Release • Mode PT: - Random Access Reception - Association Request and Response Test System: • Configuration: CF02 when EUT in FT Mode • Configuration: CF03 when EUT in PT Mode EUT: • Mode: FT or PT Preamble: • Mode FT: - EUT in FT mode associated to another RD, according to Table 8.4.2.2-1 • Mode PT: - EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • Test Mode on ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 70
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.5.2.4 Test Procedure Sequence
Table 8.1.5.2.4-1: Test Sequence Step Procedure Message Sequence TP Verdict EUT-TS Message - EXCEPTION: Steps 1 to 4 are repeated for each HARQ process. - - - - 1 The TS transmits a packet using Physical Layer Control Field Type 2 indicating "Header Format": 000, such that the EUT cannot successfully decode the PDC. <-- MAC PDU - - 2 Check: Does the EUT transmit a packet containing Transmission Feedback indicating NACK, after the total HARQ feedback delay and before delay Max HARQ Re-Tx after step 1, to indicate unsuccessful reception of the packet transmitted in step 1? --> HARQ NACK 1 P - EXCEPTION: Step 3 shall be repeated until HARQ ACK is received at step 4 or until timer "Max HARQ Re-Tx" expires for the MAC PDU. - - - - 3 The TS re-transmits the packet from step 1, such that the EUT can successfully decode the PDC. <-- MAC PDU - - - EXCEPTION: HARQ NACKs from the EUT are allowed at step 4. - - - - 4 Check: Does the EUT transmit a packet containing Transmission Feedback indicating ACK, after the total HARQ feedback delay and before delay Max HARQ Re-Tx after step 3, to indicate successful reception of the packet transmitted in step 3? --> HARQ ACK 2 P
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.6 Multiplexing and Assembly
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.6.1 MAC IE Multiplexing
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.6.1.1 Test Purpose
Table 8.1.6.1.1-1: Test Purpose to sequence mapping Test Name Reference TP MAC PDU Multiplexing 7.1.6.1 1 Padding IE 7.1.6.2 2
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.6.1.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.6.1.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode o.1 pc_mac_pt PT mode o.1 pc_mac_muxa Support MAC PDU multiplexing and assembly m o.1: At least one of the features shall be supported. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 71
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.6.1.3 Pre-Test Conditions
Prerequisite tests: • None Test System: • Configuration: CF02 when EUT in FT Mode • Configuration: CF03 when EUT in PT Mode EUT: • Mode: FT or PT Preamble: • Mode FT: - EUT in FT mode associated to another RD, according to Table 8.4.2.2-1 • Mode PT: - EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 PIXIT parameters: Table 8.1.6.1.3-1: PIXIT parameters PIXIT parameter Description Status px_max_app_packet_bytes Maximum application data payload size supported by the EUT m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.6.1.4 Test Procedure Sequence
Table 8.1.6.1.4-1: Test Sequence Step Procedure Message Sequence TP Verdict EUT-TS Message - EXCEPTION: Repeat steps 1 to 4 for different values of S = 20, 40, 80, 120, but where 0 < S ≤ px_max_app_packet_bytes. - - - - 1 The TS transmits a Data Request message indicating: request_flags: 0x80 (HARQ), request_t_interval: 0x00 (As soon as possible), request_n_packets: 0x01 (1 packet), request_n_bytes: S. <-- TMC: Data Request - - 2 The EUT transmits a packet containing Data Request Response. --> TMC: Data Request Response - - 3 Check: Does the MAC PDU transmitted in step 2 contain full and correctly multiplexed IEs? - - 1 P 4 Check: Does the MAC PDU transmitted in step 2 contain a Padding IE which does not increase the TBS length for the used configuration (see note). - - 2 P NOTE: The Padding IE may be excluded if a valid MAC PDU size is otherwise reached. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 72
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.7 Mobility Procedures
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.7.1 PT initiated mobility
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.7.1.1 Test Purpose
Table 8.1.7.1.1-1: Test Purpose to sequence mapping Test Name Reference TP Mobility by more suitable RSSI-2 7.1.7.1 1 Validity of Association Release message 7.1.8.3.1 2
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.7.1.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.7.1.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_mob Support mobility procedures m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.7.1.3 Pre-Test conditions
Clause 5.7 Mobility Procedures as defined in ETSI TS 103 636-4 [4] does not impose mandatory requirements for the RD but provides recommendations on how implementation should behave. Therefore, supporting test descriptions defined in this clause and test purposes defined in clause 7.1.7 are optional. Prerequisite tests: • Selecting RD for association • Transmission on Random Access Resources • Association Request and Release Test System: • Configuration: CF05 • The link quality between the EUT and FT1 shall be near the sensitivity level • FT1 and FT2 use equal power levels for transmitting beacons • FT1 and FT2 broadcast the same cost value in the Cluster Beacon message • FT1 and FT2 operate on the same physical channel EUT: • Mode: PT Preamble: • The EUT is switched on ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 73 PIXIT parameters: Table 8.1.7.1.3-1: PIXIT parameters PIXIT parameter Description Status px_beacon_scan_period Time period at which the EUT scans for beacons m px_min_sensitivity_level RD sensitivity level m c.1: IF pc_mac_bea_network_tx THEN m ELSE n/a.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.7.1.4 Test Procedure Sequence
Table 8.1.7.1.4-1: Test System RSSI-2 configuration Type LT RSSI-2 level of beacon transmissions at EUT input (dBm) T1 FT1 px_min_sensitivity_level + MIN_QUALITY + 10 dB + PowerMargin FT2 px_min_sensitivity_level + MIN_QUALITY T2 FT1 px_min_sensitivity_level + MIN_QUALITY FT2 px_min_sensitivity_level + MIN_QUALITY + RELATIVE_QUALITY + PowerMargin PowerMargin as defined in Table 8.1.1.4.2-1. NOTE 1: RELATIVE_QUALITY is signalled in the Cluster Beacon IE. NOTE 2: When setting the PowerMargin the TS should consider its own transmission output power tolerance to ensure the correct power level at the input of the EUT. Table 8.1.7.1.4-2: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The test system path losses are adjusted such that the RSSI-2 level at the EUT input is according to row "T1" in Table 8.1.7.1.4-1. - - - - 2 The TS (FT1) transmits periodic Cluster beacon message, indicating CountToTrigger value. <-- Cluster Beacon message - - 3 The EUT transmits an Association Request message to the TS (FT1). --> Association Request message - - 4 The TS (FT1) transmits an Association Response message indicating ACK. <-- Association Response message - - 5 The TS (FT2) transmits periodic Cluster beacon messages. <-- Cluster Beacon message - - 6 Wait px_beacon_scan_period * CountToTrigger seconds. - - - - 7 Check: Does the EUT transmit an Association Request message to FT2. --> Association Request message 1 F 8 The test system path losses are adjusted such that the RSSI-2 level at the EUT input is according to row "T2" in Table 8.1.7.1.4-1. - - - - 9 Wait pc_mac_mob_beacon_scan_period * CountToTrigger seconds. - - - - - EXCEPTION: The step sequences (10a1 to 10a2) and (10b1 to 10b2) can occur in any order. The "lower case" letter identifies sequence steps that are always performed in order. - - - - 10a1 Check: Does the EUT transmit an Association Request message to FT2. --> Association Request message 1 P 10a2 The TS (FT2) transmits an Association Response message. <-- Association Response message - - 10b1 Check: Does the EUT transmit an Association Release message to FT1. --> Association Release message 1 - 10b2 Check: Does the EUT transmit a valid Association Release message in step 10b1. - - 2 P ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 74
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8 Association Procedure
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.1 Association Response and Release
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.1.1 Test Purpose
Table 8.1.8.1.1-1: Test Purpose to sequence mapping Test Name Reference TP Association Response 7.1.8.1.2 1 Validity of Association Response message 7.1.8.1.1 2 Association Release 7.1.8.3.2 3
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.1.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.8.1.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode m pc_mac_ass_ft Support FT mode association procedures m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.1.3 Pre-Test conditions
Prerequisite tests: • Beaconing Transmission • Random Access Reception Test System: • Configuration: CF02 EUT: • Mode: FT Preamble: • EUT is transmitting Cluster Beacon(s). • Test mode on PICS parameters: Table 8.1.8.1.3-1: Additional PICS parameters PICS parameter Description Status pc_mac_sec Support MAC Security procedures o pc_smcb Smart Metering, City and Buildings o ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 75
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.1.4 Test Procedure Sequence
Table 8.1.8.1.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits an Association Request message. <-- Association Request - - 2a Check: Does the EUT transmit an Association Response message as a random-access response within the RACH response window? --> Association Response 1 P 2b Check: Does the EUT transmit a valid Association Response message in step 2a? - - 2 P - EXCEPTION: Steps 3 to 6 are executed based on the Association Response message feedback transmitted in step 2. - - - - 3 IF the Association Response message in step 2a indicates ACK, THEN the TS transmits a Data Request message indicating: request_flags: 0x80 (HARQ), request_t_interval: 0x14 (2 seconds), request_n_packets: 0xff (continuous), request_n_bytes: 0x000a (10-byte data payload). <-- TMC: Data Request - - 4 Check: Does the EUT transmit a Data Request Response message? --> TMC: Data Request Response - P 5 The TS transmits an Association Release message 1 second after step 4. <-- Association Release message - - 6 Check: Does the EUT transmit a packet within 2 seconds after the reception of the Association Release message? --> DLC PDU 3 F
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.2 Association Request and Release
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.2.1 Test Purpose
Table 8.1.8.2.1-1: Test Purpose to sequence mapping Test Name Reference TP Association Request 7.1.8.2.2 1 Validity of Association Request message 7.1.8.2.1 2 Association Request timeout 7.1.8.2.3 3 Association Rejected 7.1.8.2.5 4 Association Accepted 7.1.8.2.4 5 Association Release 7.1.8.3.2 6
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.2.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.8.2.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_ass_pt Support PT mode association procedures m ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 76
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.2.3 Pre-Test conditions
Prerequisite tests: • Transmission on Random Access Resources Test System: • Configuration: CF03 EUT: • Mode: PT Preamble: • The EUT is switched on • Test mode on PICS parameters: Table 8.1.8.2.3-1: Additional PICS parameters PICS parameter Description Status pc_mac_sec Support MAC Security procedures o pc_smcb Smart Metering, City and Buildings o ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 77
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.8.2.4 Test Procedure Sequence
Table 8.1.8.2.4-1: Test Sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits periodic Cluster Beacon messages. <-- Cluster Beacon message - - 2a Check: Does the EUT transmit an Association Request message? --> Association Request message 1 P 2b Check: Does the EUT transmit a valid Association Request message in step 2a? - - 2 P 3 The TS ignores the Association Request message. - - - - 4 Check: Does the EUT re-transmit the Association Request message after the RACH response window? --> Association Request message 3 P 5 The TS transmits an Association Response message as a random-access response indicating NACK. <-- Association Response message - - 6 Check: Does the EUT transmit an Association Request message within the time indicated as rejectTime? --> Association Request message 4 F 7 The EUT transmits an Association Request message. --> Association Request message - - 8 The TS transmits an Association Response message as a random-access response indicating ACK. <-- Association Response message - - 9 The TS transmits a Data Request message indicating: request_flags: 0x80 (HARQ), request_t_interval: 0x14 (2 seconds), request_n_packets: 0xff (continuous), request_n_bytes: 0x000a (10-byte data payload). <-- TMC: Data Request - - 10 Check: Does the EUT transmit a Data Request Response message? --> TMC: Data Request Response 5 P 11 TS transmits an Association Release message 1 second after step 10. <-- Association Release message - - 12 Check: Does the EUT transmit a Data Request Response message within 2 seconds after reception of the Association Release message? --> TMC: Data Request message 6 F
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9 Security Procedures
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.1 Mode 1 as PT
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.1.1 Test Purpose
Table 8.1.9.1.1-1: Test Purpose to sequence mapping Test Name Reference TP Message integrity 7.1.9.1.1 1 Deciphering Capability 7.1.9.1.2 2 Security Capability 7.1.9.1.3 3
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.1.2 Test Applicability
This test is applicable according to the following PICS parameters. ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 78 Table 8.1.9.1.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_sec Support MAC Security procedures m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.1.3 Pre-Test conditions
Prerequisite Tests: • Transmission on Random Access Resources • Association Request and Release Test System: • Configuration: CF03 • The integrity and encryption keys shall match with the EUT unless otherwise specified in the procedure EUT: • Mode: PT Preamble: • The EUT is switched on
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.1.4 Test Procedure sequence
Table 8.1.9.1.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The TS transmits Cluster Beacon messages, with MAC security enabled, and ciphered using different encryption key than the EUT. <-- Cluster Beacon message - - 2 Check: Does the EUT send an Association Request message? --> Association Request message 1 F 3 The TS transmits Cluster Beacon messages, with MAC security enabled, and integrity protected using different key than the EUT. <-- Cluster Beacon message - - 4 Check: Does the EUT transmit an Association Request message? --> Association Request message 1 F 5 The TS transmits Cluster Beacon messages, with MAC security enabled. <-- Cluster Beacon message - - 6 Check: Does the EUT transmit an Association Request message? --> Association Request message 2 P 6a Check: Does the EUT transmit the Association Request message in step 6a with security enabled? - - 3 P 7 The TS transmits an Association Response message as a random-access response. <-- Association Response message - - ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 79
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.2 Mode 1 as FT
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.2.1 Test Purpose
Table 8.1.9.2.1-1: Test Purpose to sequence mapping Test Name Reference TP Message integrity 7.1.9.1.1 1 Deciphering Capability 7.1.9.1.2 2 Security Capability 7.1.9.1.3 3
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.2.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.1.9.2.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode m pc_mac_sec Support MAC Security procedures m
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.2.3 Pre-Test conditions
Prerequisite Tests: • Transmission on Random Access Resources • Association Response and Release Test System: • Configuration: CF02 • The integrity and encryption keys shall match with the EUT unless otherwise specified in the procedure EUT: • Mode: FT Preamble: • The EUT is switched on ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 80
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.9.2.4 Test Procedure sequence
Table 8.1.9.2.4-1: Test sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The EUT transmits Cluster Beacon messages, with MAC security enabled. --> Cluster Beacon message - - 2 The TS transmits an Association Request message with MAC security enabled and ciphered using different encryption key than the EUT. <-- Association Request message - - 3 Check: Does the EUT transmit an Association Response message? --> Association Response message 1 F 4 The TS transmits an Association Request message with MAC security enabled and integrity protected using different key than the EUT. <-- Association Request message 5 Check: Does the EUT transmit an Association Response message? --> Association Response message 1 F 6 The TS transmits an Association Request message with MAC security enabled. <-- Association Request message 7 Check: Does the EUT transmit an Association Response message? --> Association Response message 2 P 7a Check: Does the EUT transmit the Association Response message in step 7a with security enabled? - - 3 P
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10 Reconfiguration Procedus
Void.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.11 Group Assignment Procedus
Void.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10 Paging procedures
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.1 Paging
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.1.1 Test Purpose
Table 8.1.10.1.1-1: Test Purpose to sequence mapping Test Name Reference TP Paging transmission 7.1.10.1 1 Data transmission within random-access response 7.1.3.2.3 2
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.1.2 Test Applicability
Table 8.1.10.1.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode m pc_mac_rach_res_bea Support Random Access Resource announcement in beacon messages m pc_mac_pg Support Paging procedures m ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 81
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.1.3 Pre-Test conditions
Prerequisite tests: • Transmission on Random Access Resources • Association Request and Release Test System • Configuration: CF02 EUT: • Mode: FT Preamble: • EUT in FT mode having association to another RD, according to Table 8.4.2.2-1 • Test Mode on
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.1.4 Test Procedure Sequence
Table 8.1.10.1.4-1: Test Sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The EUT transmits periodic Cluster Beacon messages. --> Cluster Beacon message - - 2 Command the EUT to transmit a packet to the LT_PT. - - - - 2 Check: Does The EUT transmit a Cluster Beacon message containing Broadcast Indication IE indicating paging for LT_PT. --> Cluster Beacon message 1 P 3 The LT_PT sends a packet containing Keep alive IE as a polling message. <-- Keep Alive IE - - 4 Check: Does the EUT transmit a packet as a random-access response. --> MAC PDU 2 P
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.2 Paging response
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.2.1 Test Purpose
Table 8.1.10.2.1-1: Test Purpose to sequence mapping Test Name Reference TP Paging reception and response 7.1.10.2 1
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.2.2 Test Applicability
Table 8.1.10.2.2-1: PICS selection parameters PICS Selection Description Status pc_mac_pt PT mode m pc_mac_pg Support Paging procedures m ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 82
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.2.3 Pre-Test conditions
Prerequisite tests: • Transmission on Random Access Resources • Association Request and Release Test System: • Configuration: CF02 EUT: • Mode: PT Preamble: • EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • Test Mode on
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.1.10.2.4 Test Procedure Sequence
Table 8.1.10.2.4-1: Test Sequence Step Procedure Message Sequence TP Verdict EUT-TS Message 1 The LT_FT transmits periodic Cluster Beacon messages. <-- Cluster Beacon message - - 2 The LT_FT transmits a Cluster Beacon message containing Broadcast Indication IE indicating paging for EUT. <-- Cluster Beacon message - - - EXCEPTION: Either one of the sequences (3a1 to 3a2) or (3b1 to 3b2) is allowed to occur. - - - - 3a1 Check: Does the EUT transmit a packet containing a Keep alive IE to LT_FT? --> Keep Alive IE 1 P 3a2 The LT_FT transmits a packet as response. <-- MAC PDU - - 3b1 Check: Does the EUT transmit an Association Request message indicating paging response? --> Association Request 1 P 3b2 The LT_FT transmits an Association Response message. <-- Association Response - -
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.2 DLC layer Test Descriptions
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.2.1 DLC Segmentation and Reassembly
Void.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.2.2 DLC Retransmissions (ARQ) using implicit ACK/NACK
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.2.2.1 Test Purpose
Table 8.2.2.1-1: Test Purpose to sequence mapping Test Name Reference TP DLC PDU successful transmission 7.2.2.2 1 DLC PDU retransmisssion 7.2.2.1 2 ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 83
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.2.2.2 Test Applicability
This test is applicable according to the following PICS parameters. Table 8.2.2.2-1: PICS selection parameters PICS Selection Description Status pc_mac_ft FT mode o.1 pc_mac_pt PT mode o.1 pc_dlc_st1 DLC service type 1 o.2 pc_dlc_st2 DLC service type 2 o.2 pc_dlc_st3 DLC service type 3 o.2 o.1: The EUT shall support at least one of these features. o.2: The EUT shall support at least one of these features.
8e90692f70e1e9a0f58f164e7ad90f06
104 047-2
8.2.2.3 Pre-Test conditions
Prerequisite tests: • MAC: Transmission on Random Access Resources • MAC: Random Access Data Transmission • MAC: HARQ Transmission • MAC Mode FT: - MAC: Beaconing Transmission - MAC: Association Response and Release • MAC Mode PT: - MAC: Association Request and Release Test System: • Configuration: CF02 when EUT in FT Mode • Configuration: CF03 when EUT in PT Mode EUT: • Mode: FT or PT Preamble: • Mode FT: - EUT in FT mode associated to another RD, according to Table 8.4.2.2-1 • Mode PT: - EUT in PT mode associated to another RD, according to Table 8.4.3.2-1 • Test mode on PICS & PIXIT parameters: Table 8.2.2.3-1: Additional PICS parameters PICS parameter Description Status pc_mac_harq_tx Support HARQ transmission o ETSI ETSI TS 104 047-2 V1.1.1 (2025-10) 84