id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 248
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
101 396
|
Digital cellular telecommunications system (Phase 2+) (GSM); Name identification supplementary services; Stage 3 (GSM 04.96 version 7.0.0 Release 1998)
|
TS
|
7.0.0
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101396/07.00.00_60/ts_101396v070000p.pdf
|
The present document specifies the procedures used at the radio interface for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of name identification supplementary services. Provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provider and cause no signalling on the radio interface. In GSM 04.10 the general aspects of the specification of supplementary services at the layer 3 radio interface are given. GSM 04.80 specifies the formats and coding for the supplementary services. Definitions and descriptions of supplementary services are given in GSM 02.04 and GSM 02.8x and 02.9x-series. GSM 02.96 is related specially to name identification supplementary services. Technical realization of supplementary services is described in GSM 03.11 and GSM 03.8x and 03.9x-series. Technical specification GSM 03.96 is related specially to name identification supplementary services. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in GSM 04.07 and GSM 04.08. The following supplementary services belong to the name identification supplementary services and are described in the present document: - Calling name presentation (CNAP);
|
101 396
|
Digital cellular telecommunications system (Phase 2+) (GSM); Name identification supplementary services; Stage 3 (GSM 04.96 version 6.0.1 Release 1997)
|
TS
|
6.0.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101396/06.00.01_60/ts_101396v060001p.pdf
|
The present document specifies the procedures used at the radio interface for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of name identification supplementary services. Provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provider and cause no signalling on the radio interface. In GSM 04.10 the general aspects of the specification of supplementary services at the layer 3 radio interface are given. GSM 04.80 specifies the formats and coding for the supplementary services. Definitions and descriptions of supplementary services are given in GSM 02.04 and GSM 02.8x and 02.9x-series. GSM 02.96 is related specially to name identification supplementary services. Technical realization of supplementary services is described in GSM 03.11 and GSM 03.8x and 03.9x-series. Technical specification GSM 03.96 is related specially to name identification supplementary services. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in GSM 04.07 and GSM 04.08. The following supplementary services belong to the name identification supplementary services and are described in the present document: - Calling name presentation (CNAP);
|
101 395
|
Digital cellular telecommunications system (Phase 2+) (GSM); Name identification supplementary services; Stage 2 (GSM 03.96 version 7.0.0 Release 1998)
|
TS
|
7.0.0
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101395/07.00.00_60/ts_101395v070000p.pdf
|
The present document gives the stage 2 description of the Name Identification Supplementary Services. The group of Name Identification Supplementary Services contains the following Supplementary Service: CNAP - Calling name presentation (clause 4);
|
101 395
|
Digital cellular telecommunications system (Phase 2+) (GSM); Name identification supplementary services; Stage 2 (GSM 03.96 version 6.0.1 Release 1997)
|
TS
|
6.0.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101395/06.00.01_60/ts_101395v060001p.pdf
|
The present document gives the stage 2 description of the Name Identification Supplementary Services. The group of Name Identification Supplementary Services contains the following Supplementary Service: CNAP - Calling name presentation (clause 4);
|
101 394
|
Digital cellular telecommunications system (Phase 2+) (GSM); Name identification supplementary services; Stage 1 (GSM 02.96 version 7.0.0 Release 1998)
|
TS
|
7.0.0
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101394/07.00.00_60/ts_101394v070000p.pdf
|
The present document describes the supplementary services belonging to the group Name Identification supplementary services. The general aspects, including definitions and recommended provision, of the description of the GSM supplementary services are given in GSM 02.04. The group of Name Identification supplementary services is divided into the following supplementary services: CNAP Calling Name Presentation (clause 4).
|
101 394
|
Digital cellular telecommunications system (Phase 2+) (GSM); Name identification supplementary services; Stage 1 (GSM 02.96 version 6.0.1 Release 1997)
|
TS
|
6.0.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101394/06.00.01_60/ts_101394v060001p.pdf
|
The present document describes the supplementary services belonging to the group Name Identification supplementary services. The general aspects, including definitions and recommended provision, of the description of the GSM supplementary services are given in GSM 02.04. The group of Name Identification supplementary services is divided into the following supplementary services: CNAP Calling Name Presentation (clause 4).
|
101 392
|
Digital cellular telecommunications system (Phase 2+) (GSM); Signalling interworking between ISDN supplementary services; Application Service Element (ASE) and Mobile Application Part (MAP) protocols (GSM 09.13 version 7.0.0 Release 1998)
|
TS
|
7.0.0
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101392/07.00.00_60/ts_101392v070000p.pdf
|
The scope of the present document is to provide a specification for interworking between the ISDN Application Service Element (ASE) protocol for supplementary services and the Mobile Application Part (MAP) protocol on MAP D- interface protocol for handling of supplementary services within the digital cellular telecommunications system (Phase 2+). This version of the specification includes the interworking for the Call Completion to Busy Subscriber (CCBS) service between the ISDN CCBS-ASE and MAP. The MAP protocol for CCBS service is specified in GSM 09.02. The ISDN CCBS-ASE protocol is specified in ETS 300 356-18. The ISDN CCBS-ASE protocol is also commonly referred to as the SSAP protocol in GSM 03.93. This specification clarifies the interworking within the HLR between these protocols for the Call Completion to Busy Subscriber (CCBS) service. Clause 4 describes the mapping between MAP application layer messages and SSAP application layer messages. Clause 5 describes the mapping between MAP message parameters and SSAP message parameters. Clause 6 describes the dialogue handling on the SSAP interface. Clause 7 describes the SCCP layer addressing for messages on the SSAP interface.
|
101 392
|
Digital cellular telecommunications system (Phase 2+) (GSM); Signalling interworking between ISDN supplementary services; Application Service Element (ASE) and Mobile Application Part (MAP) protocols (GSM 09.13 version 6.0.0 Release 1997)
|
TS
|
6.0.0
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101392/06.00.00_60/ts_101392v060000p.pdf
|
The scope of the present document is to provide a specification for interworking between the ISDN Application Service Element (ASE) protocol for supplementary services and the Mobile Application Part (MAP) protocol on MAP D- interface protocol for handling of supplementary services within the digital cellular telecommunications system (Phase 2+). This version of the specification includes the interworking for the Call Completion to Busy Subscriber (CCBS) service between the ISDN CCBS-ASE and MAP. The MAP protocol for CCBS service is specified in GSM 09.02. The ISDN CCBS-ASE protocol is specified in ETS 300 356-18. The ISDN CCBS-ASE protocol is also commonly referred to as the SSAP protocol in GSM 03.93. This specification clarifies the interworking within the HLR between these protocols for the Call Completion to Busy Subscriber (CCBS) service. Clause 4 describes the mapping between MAP application layer messages and SSAP application layer messages. Clause 5 describes the mapping between MAP message parameters and SSAP message parameters. Clause 6 describes the dialogue handling on the SSAP interface. Clause 7 describes the SCCP layer addressing for messages on the SSAP interface.
|
101 388
|
Access Terminals Transmission and Multiplexing (ATTM); Access transmission systems on metallic access cables; Asymmetric Digital Subscriber Line (ADSL) - European specific requirements [ITU-T Recommendation G.992.1 modified]
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/101388/01.04.01_60/ts_101388v010401p.pdf
|
The present document specifies European requirements for ADSL. The definition of new line codes and/or transmission systems is outside the scope of the present document. The present document endorses ITU-T Recommendation G.992.1 [2], the contents of which apply together with the addition of the modifications being covered herein. In particular the aspects covered by the present document are related to: 1) Methods to allow the simultaneous delivery of ADSL and ISDN-BA services [1] on the single pair. For example the techniques and redefinition of the ADSL signals/parameters as defined in ITU-T Recommendation G.992.1 [2] to allow ISDN-BA base band signals to occupy frequencies below ADSL (from here onwards referred as out-of-band transport). 2) Performance Objectives and Test methods for ADSL over POTS/ISDN-BA. 3) TS 102 080 [1] backward compatibility. 4) Power feeding for the transported ISDN-BA. 5) Latency. 6) ISDN-BA splitter characteristics.
|
101 377-6-1
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 1: Basic Rate Speech; Basic Rate Speech Processing Functions; GMR-2 06.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770601/01.01.01_60/ts_1013770601v010101p.pdf
|
The present document provides an overview of the speech processing requirements applicable to the basic rate channel of the GMR-2 system. The speech processing functions in the GMR-2 system include the following: - speech transcoding, which includes a speech encoder that converts digitized speech samples into a compressed binary bit stream and a speech decoder that converts a compressed binary bit stream into digital speech samples; - discontinuous transmission (DTX), which is used to reduce the transmission rate during periods of voice inactivity; - VAD, which is used to identify periods of voice activity, as required by DTX; - CNI, which is used to convey the characteristics of the background noise from the transmit end to the receive end of the connection, in an effort to reduce the modulation of background noise that would otherwise occur with DTX; - lost speech frame substitution and muting, which is used to mask transmission errors and stolen frames. Detection and regeneration of single-frequency and dual-tone multifrequency (DTMF) signals. The high level description given in the present document relates to the Digital Voice Systems, Inc.'s (DVSI's) AMBETM 3 600 bps voice coder/decoder [7].
|
101 377-5-7
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 7: Radio Subsystem Synchronization; GMR-2 05.010
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770507/01.01.01_60/ts_1013770507v010101p.pdf
|
The present document defines the requirements for synchronization on the GMR-2 radio subsystem. However, it does not define the synchronization algorithms to be used in the MES and Gateway.
|
101 377-5-6
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 6: Radio Subsystem Link Control; GMR-2 05.008
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770506/01.01.01_60/ts_1013770506v010101p.pdf
|
The present document specifies the Radio sub-system link control implemented in the MES, Satellite, and Gateway of the GMR-2 system.
|
101 377-5-5
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 5: Radio Transmission and Reception; GMR-2 05.005
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770505/01.01.01_60/ts_1013770505v010101p.pdf
|
The present document defines the requirements for the GMR-2 Mobile Earth Station-to-satellite terminal uplink/downlink operating in the 1 500/1 600 MHz bands. Operating frequencies for the GMR-2 Ground Terminal (Gateway or NCC) -to-Satellite Terminal (ST) uplink/downlink are not specified, however, for ease of understanding, the present document describes the requirements for a GMR-2 Ground Terminal-to-Satellite Terminal uplink/downlink operating in the 3 000/6 000 MHz C-Band. Requirements are defined for two categories of parameters: a) those that are required to provide compatibility between the Mobile Earth Station, ground terminal, and satellite channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in adjacent frequency bands; b) those that define the transmission quality of the system. The present document defines RF characteristics for the Mobile Earth Station (MES), satellite terminal (ST), and ground terminal (GT-Gateway or NCC). Unless otherwise stated, the requirements defined in the present document apply to the full range of environmental conditions specified for the equipment (see clause A.4).
|
101 377-5-4
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 4: Modulation; GMR-2 05.004
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770504/01.01.01_60/ts_1013770504v010101p.pdf
|
The modulator receives the bits from the encryption unit, (see GMR-2 05.001 [2]), and produces an RF signal. The filtering of the RF signal, necessary to obtain the spectral purity, is not defined, neither are the tolerances associated with the theoretical filter requirements specified. These are contained in GMR-2 05.005 [4].
|
101 377-5-3
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 3: Channel Coding; GMR-2 05.003
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770503/01.01.01_60/ts_1013770503v010101p.pdf
|
A reference configuration of the transmission chain is shown in figure A.1 of GMR-2 05.001 [4]. According to this reference configuration, the present document specifies the data blocks given to the encryption unit. It includes the specification of encoding, reordering, and interleaving. It does not specify the channel decoding method. The definition is given for each kind of logical channel, starting from the data provided to the channel encoder by the speech coder, the data terminal equipment, or the controller of the MES. The definitions of the logical channel types used in the present document are given in clause 5 of GMR-2 05.002 [5], a summary of which is contained in Annex A of the present document.
|
101 377-5-2
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 2: Multiplexing and Multiple Access on the Radio Path; GMR-2 05.002
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770502/01.01.01_60/ts_1013770502v010101p.pdf
|
The present document defines the physical channels of the radio sub-system required to support the logical channels. It includes a description of the logical channels and the definition of TDMA frames, timeslots, and bursts.
|
101 377-5-1
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 1: Physical Layer on the Radio Path; GMR-2 05.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770501/01.01.01_60/ts_1013770501v010101p.pdf
|
The present document is an introduction to the 05-series of the GMR-2 technical specifications for the system. It consists of a general description of the organization of the physical layer with reference to the technical specifications where each part is specified in detail. It introduces furthermore, the reference configuration that will be used throughout this series of technical specifications. Operating frequencies for the GMR-2 Ground Terminal (Gateway or NCC) -to-Satellite Terminal (ST) uplink/downlink are not specified, however, for ease of understanding, the present document describes the requirements for a GMR-2 Ground Terminal-to-Satellite Terminal uplink/downlink operating in the 3 000 MHz/6 000 MHz C-Band.
|
101 377-4-14
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 14: Call Barring Supplementary Services; GMR-2 02.088
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770414/01.01.01_60/ts_1013770414v010101p.pdf
|
The present document specifies the procedures used at the radio interface (reference point Um as defined in technical specification GSM 04.02 [4]) for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of call offering supplementary services. Provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provider and cause no signalling on the radio interface. In technical specification GSM 04.10 [7], the general aspects of the specification of supplementary services at the layer 3 radio interface are given. Technical specification GSM 04.80 [8] specifies the formats and coding for the supplementary services. Definitions and descriptions of supplementary services are given in technical specifications GMR-2 02.004 [2], GSM 02.8x and 02.9x-series. Technical realization of supplementary services is described in technical specifications GSM 03.11 [3], GSM 03.8x and 03.9x-series. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in technical specifications GMR-2 04.007 [5] and GMR-2 04.008 [6]. The following supplementary services belong to the call restriction supplementary services and are described in the present document: - Barring of all outgoing calls (BAOC) – (Barring program 1) (See clause 4); - Barring of all incoming calls (BAIC) – (Barring program 1) (See clause 5).
|
101 377-4-13
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 13: Technical Realisation of the Early Flag Technique; GMR-2 04.201
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770413/01.01.01_60/ts_1013770413v010101p.pdf
|
The present document describes the so-called "Early Flag Technique (EFT)", which could be implemented in the Fax Adaptor, and built as a unit separate to a Group 3 Fax machine or as an integral part of a GMR-2 specific Fax machine. The use of the Early Flags technique is meant to improve the performance of GMR-2 Fax communication service. This document is to be used in conjunction with GMR-2 03.045 [2], which describes the overall system level aspects of ITU Group 3 Fax communication over the GMR-2 channel. The EFT is a "delay mitigating" technique for the provision of Real-Time Facsimile Service over a low bit rate digital satellite channel. The present document addresses the usage and implementation of the EFT. The EFT applies to the Mobile Earth Station (MES) and is implemented either as an add-on to the existing group 3 Facsimile machine or as an integral part of a GMR-2 specific Facsimile machine.
|
101 377-4-12
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 12: Multiparty Supplementary Services (MPTY); GMR-2 04.084
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770412/01.01.01_60/ts_1013770412v010101p.pdf
|
The present document should be read in conjunction with GSM 04.84 [2] which specifies the stage 3 description of the Multi Party (MPTY) supplementary services. The original text in GSM 04.84 [2] is fully applicable to the GMR-2 system except for the modified text shown in clause 4 of the present document.
|
101 377-4-11
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 11: Call Waiting (CW) and Call Holding (HOLD) Supplementary Services; GMR-2 04.083
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770411/01.01.01_60/ts_1013770411v010101p.pdf
|
The present document should be read in conjunction with GSM 04.83 [2] which specifies the stage 3 description of the call completion supplementary services. The original text in GSM 04.83 [2] is fully applicable to the GMR-2 system except for the modified text shown in clause 4 of the present document.
|
101 377-4-10
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 10: Rate Adaptation on the Mobile Earth Station (MES) - Gateway System Interface; GMR-2 04.021
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770410/01.01.01_60/ts_1013770410v010101p.pdf
|
The present document defines the rate adaptation functions to be used in GMR-2 Mobile Earth Stations for adapting terminal interface data rates to the MS-BSS interface data rates in accordance with GSM 03.10 [2]. The provision of these functions will depend on the services a particular station is designed to support. NOTE: The present document should be considered together with GSM 08.20 [7] (Rate adaption on the BSS- MSC interface) to give a complete description of GMR-2 rate adaptation.
|
101 377-4-9
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 9: Performance requirements on the mobile radio interface; GMR-2 04.013
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770409/01.01.01_60/ts_1013770409v010101p.pdf
|
The present document is a delta document derived from GSM 04.13 [5] and it specifies measurable performance requirements for signalling aspects of mobile stations. To allow implementation flexibility it has been chosen to specify requirements on the whole mobile station rather than to specify requirements on each "OSI layer". As a consequence the performance requirements do not fit conveniently in specifications such as GMR-2 04.008 [4] (layer 3 only) or GMR-2 04.006 [3] (layer 2 only). The main aim of the present document is to provide the justification for testing of requirements that are not included in other GMR-2 specifications. Where specific requirements are included in other GMR-2 specifications they are not duplicated here. Mobile Stations have to perform a wide variety of functions. As a consequence most performance measurements have to be made under a set of defined conditions: where necessary, these are included in the present document. Where necessary certain assumptions are made about the interaction times between the mobile equipment and the SIM. If the (test) SIM does not respond within the assumed time then appropriate allowances shall be made. Additionally, it is intended that the present document should contain sufficient requirements to enable some undefined network timers in GMR-2 04.008 [4] to be calculated.
|
101 377-4-7
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 7: Mobile radio interface Layer 3 Specifications; GMR-2 04.008
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770407/01.01.01_60/ts_1013770407v010101p.pdf
|
The present document specifies the procedures used at the radio interface (Reference Point Um, see GSM 04.02 [11]) for Call Control (CC), Mobility Management (MM) and Radio Resource (RR) management. These procedures are defined in terms of messages exchanged over the control channels of the radio interface. The control channels are described in GMR-2 04.003 [12]. The structured functions and procedures of this protocol and the relationship with other layers and entities are described in general terms in GMR-2 04.007 [16].
|
101 377-4-6
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 6: Mobile Radio Interface Signalling Layer 3; General Aspects; GMR-2 04.007
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770406/01.01.01_60/ts_1013770406v010101p.pdf
|
The present document defines the architecture of layer 3 and its sublayers on the GMR-2 Um interface, i.e., the interface between the Mobile Earth Station (MES) and the Network. It also defines the basic message format and error handling applied by the layer 3 protocols. The corresponding protocols are defined elsewhere as follows: 1) The Radio Resource (RR) management protocol is defined in GMR-2 04.008 [5]; 2) The Mobility Management (MM) protocol is defined in GMR-2 04.008 [5]; 3) The Call Control (CC) protocol is defined in GMR-2 04.008 [5]; 4) The Supplementary Services (SS) protocol is defined in GSM 04.10 [6], GSM 04.8x and GSM 04.9x; 5) The Short Message Service (SMS) protocol is defined in GSM 04.11 [7]. The communication between sublayers and adjacent layers and the services provided by the sublayers are distributed by use of abstract service primitives. But only externally observable behaviour resulting from the description is normatively prescribed by the present document.
|
101 377-4-5
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 5: GMR-2 Mobile Earth Station - Network Interface; Data Link (DL) layer Specifications; GMR-2 04.006
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770405/01.01.01_60/ts_1013770405v010101p.pdf
|
The present document defines the technical specification for a data link layer protocol to be used for signalling, and possibly other applications, on the MES-NW interface.
|
101 377-4-4
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 4: Data Link Layer General Aspects; GMR-2 04.005
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770404/01.01.01_60/ts_1013770404v010101p.pdf
|
The present document defines a technical specification which describes in general terms the Link Access Procedures on the Dm channel, LAPDm. The application of this protocol to other channel types is for further study. Details are provided in GMR-2 04.006 [5].
|
101 377-4-3
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 3: Layer 1 General requirements; GMR-2 04.004
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770403/01.01.01_60/ts_1013770403v010101p.pdf
|
The present document defines a technical specification for the service offered by the physical layer (GMR-2 05-series of technical specifications) of the MES-to-network interface (GMR-2 05 and 04-series of technical specifications). Its main objective is to be a guidance for the interface between the GMR-2 technical specifications in the 05-series and the 04-series. It also specifies the format of signalling channels and the order of bit transmission. As far as possible, the present document makes use of the layering principles of the reference model for open system interconnection (OSI) as contained in ITU-T Recommendations X.200 [16] and X.210 [17].
|
101 377-4-2
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 2: GMR-2 Mobile Earth Station-Network Interface; Channel Structures and Access capabilities; GMR-2 04.003
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770402/01.01.01_60/ts_1013770402v010101p.pdf
|
The present document defines the technical specification for limited sets of channel types, access capabilities and channel configurations at the mobile earth station (MES) to the GMR-2 network radio interface.
|
101 377-4-1
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 1: GMR-2 Mobile Earth Station-Network Interface; General Aspects and Principles; GMR-2 04.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770401/01.01.01_60/ts_1013770401v010101p.pdf
|
The present document establishes the general principles relating to the technical specifications for the GMR-2 mobile earth station (MES) - network interface.
|
101 377-3-17
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 17: Call Barring (CB) Supplementary Services - Stage 2; GMR-2 03.088
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770317/01.01.01_60/ts_1013770317v010101p.pdf
|
The present document gives the stage 2 description of the call barring services. It defines the possibility for a mobile subscriber to have certain categories of calls barred. Specific categories are as follows: • Barring of all outgoing calls (BAOC) - (Barring program 1) (see figure 4.8); • Barring of all incoming calls (BAIC) - (Barring program 2) (see figure 5.8).
|
101 377-3-16
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 16: Technical Realization of Operator Determined Barring; GMR-2 03.015
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770316/01.01.01_60/ts_1013770316v010101p.pdf
|
The network feature Operator Determined Barring allows a network operator or service provider to regulate access by subscribers to GSM services, by the barring of certain categories of incoming or outgoing traffic. Operator Determined Barring applies to all bearer services and teleservices except the Emergency Call teleservice; the teleservice Short Message Point-to-Point is therefore subject to Operator Determined Barring in the same way as circuit-switched calls. The application of specific categories of Operator Determined Barring to a subscription is controlled by the network operator or service provider, using administrative interaction at the HLR; this interface is not standardized.
|
101 377-3-15
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 15: Multiparty Supplementary Services; GMR-2 03.084
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770315/01.01.01_60/ts_1013770315v010101p.pdf
|
The present document should be read in conjunction with GSM 03.84 [3], which specifies the stage 2 description of the multi party supplementary services. The original text in GSM 03.84 [3] is fully applicable to the GMR-2 system except for the modified text shown in clause 4 of the present document.
|
101 377-3-14
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 14: Call Waiting (CW) and Call Hold (HOLD) Supplementary Services - Stage 2; GMR-2 03.083
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770314/01.01.01_60/ts_1013770314v010101p.pdf
|
The present document should be read in conjunction with GSM 03.83 [4], which specifies the stage 2 description of the call completion supplementary services. The original text in GSM 03.83 [4] is fully applicable to the GMR-2 system except for the modified text shown in clause 4 of the present document.
|
101 377-3-13
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 13: Transmission Planning Aspects of the Speech Service in the Public Satellite Mobile Network (PSMN) system; GMR-2 03.050
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770313/01.01.01_60/ts_1013770313v010101p.pdf
|
The present document is concerned with the transmission planning aspects pertaining to the speech service in the PSMN system. Due to technical and economic factors, there cannot be full compliance with the general characteristics of international telephone connections and circuits recommended by ITU-T. The present document gives guidance as to the precautions, measures and minimum requirements needed for successful interworking of the PSMN with the national and international PSTN. The Recommendation identifies a number of routing and network configurations. The objective is to reach a quality as close as possible to ITU-T standards in order to safeguard the performance seen by PSTN customers.
|
101 377-3-12
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 12: Technical Realization of Facsimile Group 3 Transparent; GMR-2 03.045
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770312/01.01.01_60/ts_1013770312v010101p.pdf
|
The present document specifies the procedures for the technical realization of the group 3 facsimile service, within the GMR-2 system, using transparent network support for mobile terminated and originated automatic facsimile connections. The scope of the present document is confined to Teleservice 62.
|
101 377-3-11
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 11: Functions Related to Mobile Earth Station (MES) in Idle Mode; GMR-2 03.022
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770311/01.01.01_60/ts_1013770311v010101p.pdf
|
The present document establishes the tasks undertaken by a MES, a Dual-mode GMR-2/Terrestrial User Terminal; e.g., a GMR-2/GSM MES when in idle mode, that is, switched on but not having a dedicated channel allocated. It also describes the corresponding network functions. Service aspects of the dual mode MES are described in the in the GMR-2 02-series and GSM documents listed in clause 2. The present document outlines how the requirements of such MESs in idle mode of operation shall be implemented. Further details are given in GMR-2 04.008 [24] and GMR-2 05.008 [26]. Clause 5 of the present document gives a general description of the idle mode process. Clause 6 defines the main requirements and technical solutions of those requirements. Clause 7 describes the processes used in idle mode. There is inevitably some overlap between these clauses.
|
101 377-3-10
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 10: Security related Network Functions; GMR-2 03.020
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770310/01.01.01_60/ts_1013770310v010101p.pdf
|
The present document specifies the network functions needed to provide the security related service and functions specified in GMR-2 02.009 [2]. The present document does not address the cryptological algorithms that are needed to provide different security related features. This topic is addressed in annex C. Wherever a cryptological algorithm or mechanism is needed, this is signalled with a reference to annex C. The references refer only to functionalities and some algorithms may be identical or use common hardware.
|
101 377-3-9
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 9: Discontinuous Reception (DRX) in the GMR-2 System; GMR-2 03.013
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770309/01.01.01_60/ts_1013770309v010101p.pdf
|
The present document defines a system wide view of the operation of discontinuous reception on the GMR-2 system. The support of DRX is mandatory in GSM PLMNs. The detailed coding and procedural details are defined in the relevant Technical Specifications dealing with the specific interfaces that are involved, for instance GSM 08.08 [5] and GMR-2 04.008 [2]. Reference is also made to the framing on the air interface which is defined in GMR-2 05.002 [3]. The Technical Specification gives an overview of the implementation of discontinuous reception DRX within the GSM system, the actions required at MSC, GWS, and MES, the support of the facility via the air interface, and some operational aspects of the facility.
|
101 377-3-8
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 8: Location Registration Procedures; GMR-2 03.012
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770308/01.01.01_60/ts_1013770308v010101p.pdf
|
The present document defines the procedures in the network related to location registration. They include: - location updating; - location cancellation; - periodic location updating; The procedures in the Mobile Earth Station (MES) are described in GMR-2 03.022 [7]. The procedures between MSC, VLR and HLR utilize the Mobile Application Part (MAP) and details concerning the exchange of information are contained in GSM 09.02 [8].
|
101 377-3-6
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 6: Handover Procedures; GMR-2 03.009
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770306/01.01.01_60/ts_1013770306v010101p.pdf
|
The present document contains a description of the procedures to be used for intra-beam channel handovers to counter in-call interference or blockage. Unlike the terrestrial GSM system, the GMR-2 system does not experience handovers between gateway subsystems or MSCs. Each gateway subsystem and MSC can have access to all the MESs within the satellite field-of-view. Additionally, the satellite-to-MES beams cover such a large geographic area that beam-to-beam handovers are not considered necessary. Handover control, as specified herein in response to interference or blockage, is primarily applicable to "non-mobile-to-mobile" Basic Rate - Normal Mode Speech connections. Optionally, handovers may be provided on "non-mobile-to-mobile" data and Basic Rate - Robust Mode Speech connections in response to interference only. In the latter case, an operator-defined subset of these specifications applies. Within the GMR-2 system, channel handovers can also occur during call initiation procedures and because of Resource Allocation Plan changes. During normal call initiation, handovers occur between a Satellite-Standalone Dedicated Control Channel (S-SDCCH) and a Satellite-Traffic Channel (S-TCH) as the connection transitions from a signalling mode to a conversation mode. During mobile-to-mobile call initiation, handovers occur in changing from a mobile-to-PSTN radio resource to a mobile-to-mobile resource. These handovers are not specified herein. Rather they are part of the normal Circuit-Switched Call Control and Radio Resource Management procedures described in GMR-2 04.008 [2].
|
101 377-3-5
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 5: Organization of Subscriber Data; GMR-2 03.008
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770305/01.01.01_60/ts_1013770305v010101p.pdf
|
The present document provides details concerning information to be stored in home location registers and visitor location registers concerning mobile subscriber. Clause 4 contains all details concerning the definition of the parameters, often given by reference to other specifications, and where the parameter is to be stored. Table 1 in clause 7 gives a summary overview and identifies the reference information required for accessing the information.
|
101 377-3-4
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 4: Restoration Procedures; GMR-2 03.007
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770304/01.01.01_60/ts_1013770304v010101p.pdf
|
The data stored in location registers are automatically updated in normal operation; the main information stored in a location register defines the location of each mobile station and the subscriber data required to handle traffic for each mobile subscriber. The loss or corruption of these data will seriously degrade the service offered to mobile subscribers; it is therefore necessary to define procedures to limit the effects of failure of a location register, and to restore the location register data automatically. The present document defines the necessary procedures. The basic principle is that restoration should be based on radio contact to avoid faulty data being spread in the system. Subscriber data for supplementary services must also be correctly restored, although the impact on service of corruption of supplementary service data is less severe. Procedures for supporting these functions are defined in GSM 09.02 [4]. If the restoration of subscriber data in the VLR is triggered by Location Updating, the VLR retrieves subscriber data from the HLR by sending an 'Update Location' request, which triggers one or more 'Insert Subscriber Data' operations from the HLR. The 'Update Location' request may also be used to send the LMSI to the HLR. If the restoration of subscriber data in the VLR is triggered by a 'Provide Roaming Number' request, the behaviour of the VLR depends on whether it is implemented according to MAP version 1 or MAP version 2. For MAP version 2, the VLR retrieves subscriber data from the HLR by sending a 'Restore Data' request, which triggers one or more 'Insert Subscriber Data' operations from the HLR. The 'Restore Data' request is also used to send the LMSI to the HLR. For MAP version 1, the VLR retrieves subscriber data from the HLR by sending a 'Send Parameters' request with parameter type 'Subscriber Data', which cannot be used to send the LMSI to the HLR. The VLR number and MSC number in the subscriber data in the HLR are updated by the 'Update Location' procedure.
|
101 377-3-3
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 3: Numbering, Addressing and Identification; GMR-2 03.003
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770303/01.01.01_60/ts_1013770303v010101p.pdf
|
The present document is a 'delta' Technical Specification which should be read in conjunction with GSM 03.03 [4]. Where the GMR-2 satellite system specification differs from the original GSM text this is cross referred back to the original GSM specification. The current GMR-2 system does not support Temporary Mobile Subscriber Identity (TMSI) and so clause 2 has been amended accordingly. Also, the composition of 'Location Area Identification' (LAI) is different for satellite systems and this is reflected in changes to clause 5 of the present document.
|
101 377-3-2
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 2: Network Architecture; GMR-2 03.002
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770302/01.01.01_60/ts_1013770302v010101p.pdf
|
The present document presents the possible architectures of the mobile system. Clause 4 of the present document contains a definition of the different functional entities needed to support the mobile service. In clause 5, the configuration of a PSMN is described as well as the organization of the functional entities; the configuration presented is the most general in order to cope with all the possible implementations which can be imagined in the different countries. To illustrate that purpose, some examples of possible configurations are presented. Clause 6 of the present document contains a brief description of the interfaces involved which shows the principle of the organization considered.
|
101 377-3-1
|
GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 1: Network Functions; GMR-2 03.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770301/01.01.01_60/ts_1013770301v010101p.pdf
|
The present document defines network functions which are necessary to support services and facilities provided by Public Satellite Mobile Networks (PSMN). A PSMN equates to the GSM Public Land Mobile Network (PLMN) and includes the link from the GMR-2 system Gateway(s) to the core network. A summary of the network functions is given in table 1 together with an indication as to whether the network must support the function. The table also indicates whether or not a function requires internetworking signalling between PSMNs, i.e. use of Mobile Application Part as defined in GSM 09.02 [23]. All functions require signalling on the radio path as specified in GMR-2 04.008 [21].
|
101 377-2-9
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 9: Bearer Services (BS) supported by a GMR-2 Public Satellite Mobile Network (PSMN); GMR-2 02.002;
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770209/01.01.01_60/ts_1013770209v010101p.pdf
|
The present document defines a set of bearer services to be provided to GMR-2 PSMN subscribers by a GMR-2 PSMN itself and in connection with other networks. The present document should also be used as a reference for defining the corresponding required mobile network capabilities which are specified by means of the "GMR-2 PSMN connection type" concept, defined in GSM 03.10 [4]. Bearer services not included in the present document that require modifications to the GMR-2 signalling specifications should not be introduced unilaterally by a mobile network operator.
|
101 377-2-8
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 8: Call Barring Supplementary Services; GMR-2 02.088
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770208/01.01.01_60/ts_1013770208v010101p.pdf
|
The present document describes the supplementary services belonging to the group CALL RESTRICTION SUPPLEMENTARY SERVICES. The general aspects - including definitions and recommended provision - of the description of the GMR-2 supplementary services are given in GMR-2 02.004 [2]. The Call Restriction supplementary services allow the possibility for a mobile subscriber to have barring of certain categories of outgoing or incoming calls at her access. The group of Call Restriction Services includes two supplementary services: - barring of outgoing calls; - barring of incoming calls. By use of subscription options, the mobile subscriber can at provision time select a set of one or more barring programs to determine the categories of calls to be barred. The following categories are defined: - all outgoing calls; - all incoming calls; NOTE: Each category (barring program) is handled as a single supplementary service. The barring services can be offered to a mobile subscriber with a password option allowing the activation and deactivation by the subscriber. One password per mobile subscriber is supported by the network for all barring services. For the definition of the password, the description of its use and its management, see GMR-2 02.004 [2].
|
101 377-2-7
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 7: Operator Determined Barring (ODB); GMR-2 02.041
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770207/01.01.01_60/ts_1013770207v010101p.pdf
|
The present document describes the network feature Operator Determined Barring (ODB). This allows the network operator or service provider to regulate, by means of an exceptional procedure, access by the subscribers to GSM services, by the barring of certain categories of outgoing or incoming calls. The purpose of this network feature is to be able to limit the service provider's financial exposure to new subscribers, or to those who have not promptly paid their bills. It may only be applied to the service provider's own subscribers.
|
101 377-2-6
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 6: Service Accessibility ; GMR-2 02.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770206/01.01.01_60/ts_1013770206v010101p.pdf
|
The present document describes the service access procedures as presented to the user. The technical realization of service accessibility in terms of registration, handover, roaming and system selection is defined in the 03-series of GMR-2 specifications. Definitions and procedures are provided in the present document for international roaming, national roaming and regionally provided service. These are mandatory in relation to the technical realization of the Mobile Station.
|
101 377-2-5
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 5: Multiparty (MPTY) Supplementary Services; GMR-2 02.084
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770205/01.01.01_60/ts_1013770205v010101p.pdf
|
The present document should be read in conjunction with GSM 02.84 [3]. Only the differences as they apply to the GMR-2 satellite system are included in the present document. The present document describes the supplementary services belonging to the group MULTI PARTY SUPPLEMENTARY SERVICES. The general aspects, including definitions and recommended provision, of the description of the GMR-2 supplementary services are given in specification GMR-2 02.004 [2]. The group of supplementary services MULTI PARTY SUPPLEMENTARY SERVICES consists of one supplementary service: • Multi Party service (see clause 4).
|
101 377-2-4
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 4: Call Waiting (CW) and Call Hold (HOLD) Supplementary Services - Stage 1; GMR-2 02.083
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770204/01.01.01_60/ts_1013770204v010101p.pdf
|
The present document should be read in conjunction with GSM 02.83 [3]. Only the differences as they apply to the GMR-2 satellite system are included in the present document. The present document describes the supplementary services belonging to the group CALL COMPLETION SUPPLEMENTARY SERVICES. The general aspects, including definitions and recommended provision, of the description of the GMR-2 supplementary services are given in specification GMR-2 02.004 [2]. The group of CALL COMPLETION SUPPLEMENTARY SERVICES is divided into the following two supplementary services: • Call Waiting (see clause 4.2); • Call Hold (see clause 4.3).
|
101 377-2-3
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 3: Security Aspects; GMR-2 02.009
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770203/01.01.01_60/ts_1013770203v010101p.pdf
|
The present document defines the security features which shall be made available in a GMR-2 PSMN, in order to provide additional protection for users of Bearer and Teleservices, together with the associated levels of protection. The present document is only concerned with the up-grading of security features in a GMR-2 PSMN. In particular, end-to-end security is outside the scope of the present document. Bearer and Teleservices are defined in GSM 02.02 [2] and GMR-2 02.003 [3] respectively, and the security features implementation aspects are described in GMR-2 03.020 [5].
|
101 377-2-2
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 2: General on Supplementary Services; GMR-2 02.004
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770202/01.01.01_60/ts_1013770202v010101p.pdf
|
The present document defines a recommended set of supplementary services, to the Teleservices and Bearer services, to be supported by a GMR-2 PSMN for interworking with other networks. The network capability requirements to support these services are also specified. The descriptions of the different supplementary services are contained in specifications GMR-2 02.080 and GSM 02.80-series. Supplementary services not covered in GMR-2 02.004, GMR-2 02.080 or GSM 02.80-series cannot be introduced unilaterally in any GMR-2 PSMN if they require modification of the GMR-2 signalling specifications. Technical realization of supplementary services is described in specifications GSM 03.11 [4] and 04.10 [5].
|
101 377-2-1
|
GEO-Mobile Radio Interface Specifications; Part 2: Service specifications; Sub-part 1: Teleservices supported by a GMR-2 Public Satellite Mobile Network (PSMN) ; GMR-2 02.003
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770201/01.01.01_60/ts_1013770201v010101p.pdf
|
The present document describes and defines a recommended set of Teleservices to be supported by a GMR-2 PSMN in connection with other networks as a basis for defining the network capabilities required. Teleservices not included in the present document should not be introduced unilaterally by a mobile network operator, if the provision of this service requires that the GMR-2 signalling specifications be modified.
|
101 377-1-3
|
GEO-Mobile Radio Interface Specifications; Part 1: General specifications; Sub-part 3: GMR-2 General System Requirements; GMR-2 01.202
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770103/01.01.01_60/ts_1013770103v010101p.pdf
|
The present document specifies the general system requirements to be used in the GMR-2 system
|
101 377-1-2
|
GEO-Mobile Radio Interface Specifications; Part 1: General specifications; Sub-part 2: Introduction to the GMR-2 family of specifications; GMR-2 01.201
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770102/01.01.01_60/ts_1013770102v010101p.pdf
|
The present document provides an introduction to the GMR-2 series of technical specifications. Where possible, terminology used throughout the GMR-2 series of Technical Specifications has been derived from the ETSI GSM specifications. For ease of reference a GSM to GMR-2 terminology cross-reference is also provided in the present document.
|
101 377-1-1
|
GEO-Mobile Radio Interface Specifications; Part 1: General specifications; Sub-part 1: Abbreviations and Acronyms; GMR-2 01.004
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013770101/01.01.01_60/ts_1013770101v010101p.pdf
|
The present document provides the abbreviations and acronyms to be used throughout the GMR-2 system. All abbreviations are presented in the singular, but are equally applicable to the plural. Annex A provides a GSM/GMR-2 Terminology Translator.
|
101 376-7-3
|
GEO-Mobile Radio Interface Specifications; Part 7: Terminal adaptor specifications; Sub-part 3: Terminal Adaptation Functions (TAF) for Services Using Synchronous Bearer Capacities; GMR-1 07.003
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760703/01.01.01_60/ts_1013760703v010101p.pdf
|
This specification defines Terminal Adaptation Functions (TAF) which are integrated in a Mobile Termination (MT) and which enable the attachment of fax adapters to an MT (see GMR-1 03.045 [6]). It is noted that the fax adapter itself may be integrated into an MT such as MESGMR-1 configuration described in GMR-1 03.045 [6]. The general aspects of Terminal Adaptation Functions are contained in specification GMR-1 07.001 [5]. This specification covers support of facsimile services that uses synchronous bearer capabilities. • V.25bis Procedure • V.25ter Procedure
|
101 376-7-2
|
GEO-Mobile Radio Interface Specifications; Part 7: Terminal adaptor specifications; Sub-part 2: Terminal Adaptation Functions (TAF) for Services Using Asynchronous Bearer capabilities; GMR-1 07.002
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760702/01.01.01_60/ts_1013760702v010101p.pdf
|
The present document defines the interfaces and Terminal Adaptation Functions (TAF) integral to a Mobile Termination (MT) which enables the attachment of asynchronous terminals to an MT (see GMR-1 04.002 [3]). The general aspects of Terminal Adaptation Functions are contained in GMR-1 07.001 [5]. The present document covers support of these services for the following interfaces and procedures: (i) V.14 [11] procedures; (ii) V.21 DTE/DCE interface [10]; (iii) V.22 bis DTE/DCE interface [12]; (iv) V.23 DTE/DCE interface [13]; (v) V.32 DTE/DCE procedures [14]; (vi) I.420 S interface [15]; (vii) V.25 bis signalling procedures [7]; (viii) V.25 ter signalling procedures. The asynchronous data rates between the MT and the TE2 are defined in GSM 02.02 [2].
|
101 376-7-1
|
GEO-Mobile Radio Interface Specifications; Part 7: Terminal adaptor specifications; Sub-part 1: General on Terminal Adaptation Functions (TAF) for Mobile Earth Stations (MES); GMR-1 07.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760701/01.01.01_60/ts_1013760701v010101p.pdf
|
The present document is based on the principles of terminal adapter functions presented in the ITU-T I-series of recommendations (I.460-I.463 [8]). The GMR-1 satellite system supports a wide range of voice and non-voice services in the same network. In order to enable non-voice traffic in the GMR-1 satellite system there is a need to connect various kinds of terminal equipment to the Mobile Termination (MT). The target of the present document is to outline the functions needed for the terminal adaptation. In GSM 02.02 [2] the bearer services are described. The general network configuration is described in GMR-1 03.002 [3] and the GMR-1 satellite network access reference configuration is defined in GMR-1 04.002 [5]. The various connection types used in the GMR-1 satellite network are presented in GSM 03.10 [4]. Terminology used in the present document is presented in GMR-1 01.004 [1]. For support of data services between GMR-1 satellite network and other networks see GSM 09-series of Specifications.
|
101 376-6-6
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 6: Vocoder: Voice Activity Detection (VAD); GMR-1 06.032
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760606/01.01.01_60/ts_1013760606v010101p.pdf
|
The present document defines the VAD algorithm that is used in the GMR-1 system to facilitate discontinuous transmission (DTX) as described in GMR-1 06.031 [3]. In addition, the present document includes test methods that must be used to verify that any VAD algorithms used in the GMR-1 system are compliant with the present document.
|
101 376-6-5
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 5: Vocoder: Discontinuous Transmission (DTX); GMR-1 06.031
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760605/01.01.01_60/ts_1013760605v010101p.pdf
|
The present document defines the DTX function that is used in the GMR-1 system. In addition, an overview of the interface with related functions such as voice activity detection (VAD) and comfort noise insertion (CNI) is provided.
|
101 376-6-4
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 4: Vocoder: Comfort Noise Aspects; GMR-1 06.012
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760604/01.01.01_60/ts_1013760604v010101p.pdf
|
The present document provides the transmit and receive requirements for the correct operation of comfort noise insertion in the GMR-1 system.
|
101 376-6-3
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 3: Vocoder: Substitution and Muting of Lost Frames; GMR-1 06.011
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760603/01.01.01_60/ts_1013760603v010101p.pdf
|
The present document defines a frame substitution and muting procedure that will be used by the RX DTX Handler when one or more lost speech or silence descriptor (SID) frame is received from the radio subsystem. The requirements of the present document are mandatory for all implementations to be used in the GMR-1 system.
|
101 376-6-2
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 2: Vocoder: Speech Transcoding; GMR-1 06.010
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760602/01.01.01_60/ts_1013760602v010101p.pdf
|
The present document provides a high-level algorithmic description of the vocoder [6] and integrated functions which include voice activity detection (VAD), tone detection, comfort noise insertion (CNI), forward error control (FEC), frame substitution (frame repeats), and frame muting.
|
101 376-6-1
|
GEO-Mobile Radio Interface Specifications; Part 6: Speech coding specifications; Sub-part 1: Speech Processing Functions; GMR-1 06.001
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760601/01.01.01_60/ts_1013760601v010101p.pdf
|
The present document is an introduction to the GMR-1 06-series of technical specifications, which deal with the speech processing systems functions in the GMR-1 System. A general overview of each speech processing function is given with reference to the technical specification where each part is specified in detail.
|
101 376-5-7
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 7: Radio Subsystem Synchronization; GMR-1 3G 45.010
|
TS
|
3.4.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760507/03.04.01_60/ts_1013760507v030401p.pdf
|
The present document presents the requirements for synchronizing timing and frequency between the MES and the Gateway Station (GS) in the GMR-1 3G Mobile Satellite System for circuit switch and packet switch modes of operation.
|
101 376-5-7
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 7: Radio Subsystem Synchronization; GMPRS-1 05.010
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760507/02.03.01_60/ts_1013760507v020301p.pdf
|
The present document presents the requirements for synchronizing timing and frequency between the MES and the Gateway Station (GS) in the GMR-1 3G Mobile Satellite System for circuit switch and packet switch modes of operation.
|
101 376-5-7
|
GEO-Mobile Radio Interface Specifications (Release 1); Part 5: Radio interface physical layer specifications; Sub-part 7: Radio Subsystem Synchronization; GMR-1 05.010
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760507/01.03.01_60/ts_1013760507v010301p.pdf
|
The present document presents the requirements for synchronizing timing and frequency between the MES and the Gateway Station (GS) in the GMR-1 3G Mobile Satellite System for circuit switch and packet switch modes of operation.
|
101 376-5-6
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 6: Radio Subsystem Link Control; GMR-1 3G 45.008
|
TS
|
3.4.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760506/03.04.01_60/ts_1013760506v030401p.pdf
|
The present document specifies several control aspects for the radio link between the Mobile Earth Station (MES) and the Gateway Station (GS) in the GMR-1 3G Mobile Satellite System. It specifies the operation of power control and defines dead link detection. It makes requirements for DTX operation. The present document also defines requirements for the MES for monitoring system information, as prerequisites to system access, and upon exit from dedicated mode. It makes requirements for spot beam selection and reselection. It defines the nature of the measurements that the MES uses to implement these processes. Timing and frequency control aspects of link control are to be found in ETSI TS 101 376-5-7 [6], and messages for timing and frequency control are defined in ETSI TS 101 376-4-8 [3].
|
101 376-5-6
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 6: Radio Subsystem Link Control; GMPRS-1 05.008
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760506/02.03.01_60/ts_1013760506v020301p.pdf
|
The present document specifies several control aspects for the radio link between the Mobile Earth Station (MES) and the Gateway Station (GS) in the GMR-1 3G Mobile Satellite System. It specifies the operation of power control and defines dead link detection. It makes requirements for DTX operation. The present document also defines requirements for the MES for monitoring system information, as prerequisites to system access, and upon exit from dedicated mode. It makes requirements for spot beam selection and reselection. It defines the nature of the measurements that the MES uses to implement these processes. Timing and frequency control aspects of link control are to be found in ETSI TS 101 376-5-7 [6], and messages for timing and frequency control are defined in ETSI TS 101 376-4-8 [3].
|
101 376-5-6
|
GEO-Mobile Radio Interface Specifications (Release 1); Part 5: Radio interface physical layer specifications; Sub-part 6: Radio Subsystem Link Control; GMR-1 05.008
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760506/01.03.01_60/ts_1013760506v010301p.pdf
|
The present document specifies several control aspects for the radio link between the Mobile Earth Station (MES) and the Gateway Station (GS) in the GMR-1 3G Mobile Satellite System. It specifies the operation of power control and defines dead link detection. It makes requirements for DTX operation. The present document also defines requirements for the MES for monitoring system information, as prerequisites to system access, and upon exit from dedicated mode. It makes requirements for spot beam selection and reselection. It defines the nature of the measurements that the MES uses to implement these processes. Timing and frequency control aspects of link control are to be found in ETSI TS 101 376-5-7 [6], and messages for timing and frequency control are defined in ETSI TS 101 376-4-8 [3].
|
101 376-5-5
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 5: Radio Transmission and Reception; GMR-1 3G 45.005
|
TS
|
3.5.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760505/03.05.01_60/ts_1013760505v030501p.pdf
|
The present document defines the performance requirements for the Mobile Earth Station (MES) radio transceiver for the GMR-1 3G Mobile Satellite System. Requirements are defined for two categories of parameters: • Those that are required to provide compatibility among the radio channels, connected either to separate or common antennas, which are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. • Those that define the transmission quality of the system.
|
101 376-5-5
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 5: Radio Transmission and Reception; GMPRS-1 05.005
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760505/02.03.01_60/ts_1013760505v020301p.pdf
|
The present document defines the performance requirements for the Mobile Earth Station (MES) radio transceiver for the GMR-1 3G Mobile Satellite System. Requirements are defined for two categories of parameters: • Those that are required to provide compatibility among the radio channels, connected either to separate or common antennas, which are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. • Those that define the transmission quality of the system.
|
101 376-5-5
|
GEO-Mobile Radio Interface Specifications (Release 1); Part 5: Radio interface physical layer specifications; Sub-part 5: Radio Transmission and Reception; GMR-1 05.005
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760505/01.03.01_60/ts_1013760505v010301p.pdf
|
The present document defines the performance requirements for the Mobile Earth Station (MES) radio transceiver for the GMR-1 3G Mobile Satellite System. Requirements are defined for two categories of parameters: • Those that are required to provide compatibility among the radio channels, connected either to separate or common antennas, which are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. • Those that define the transmission quality of the system.
|
101 376-5-4
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 4: Modulation; GMR-1 3G 45.004
|
TS
|
3.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760504/03.03.01_60/ts_1013760504v030301p.pdf
|
The present document defines the modulation used within the GMR-1 Mobile Satellite System. It includes the various modulation formats that are required for different physical channel types. It also defines the concept of the transmission burst and the mapping of modulated symbols to the burst, describes the required transmit filtering in general terms, and specifies the modulation accuracy.
|
101 376-5-4
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 4: Modulation; GMPRS-1 05.004
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760504/02.03.01_60/ts_1013760504v020301p.pdf
|
The present document defines the modulation used within the GMR-1 Mobile Satellite System. It includes the various modulation formats that are required for different physical channel types. It also defines the concept of the transmission burst and the mapping of modulated symbols to the burst, describes the required transmit filtering in general terms, and specifies the modulation accuracy.
|
101 376-5-4
|
GEO-Mobile Radio Interface Specifications (Release 1); Part 5: Radio interface physical layer specifications; Sub-part 4: Modulation; GMR-1 05.004
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760504/01.03.01_60/ts_1013760504v010301p.pdf
|
The present document defines the modulation used within the GMR-1 Mobile Satellite System. It includes the various modulation formats that are required for different physical channel types. It also defines the concept of the transmission burst and the mapping of modulated symbols to the burst, describes the required transmit filtering in general terms, and specifies the modulation accuracy.
|
101 376-5-3
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 3: Channel Coding; GMR-1 3G 45.003
|
TS
|
3.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760503/03.03.01_60/ts_1013760503v030301p.pdf
|
The present document specifies the data blocks given to the encryption unit and the mapping onto the free bits of a burst. It includes the specifications for encoding, reordering, interleaving, and detailed mapping onto the burst. It does not specify the channel decoding method. The definition is given for each kind of logical channel, starting with the data provided to the channel encoder by the speech coder, the data terminal equipment, or the controller of the Mobile Earth Station (MES).
|
101 376-5-3
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 3: Channel Coding; GMPRS-1 05.003
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760503/02.03.01_60/ts_1013760503v020301p.pdf
|
The present document specifies the data blocks given to the encryption unit and the mapping onto the free bits of a burst. It includes the specifications for encoding, reordering, interleaving, and detailed mapping onto the burst. It does not specify the channel decoding method. The definition is given for each kind of logical channel, starting with the data provided to the channel encoder by the speech coder, the data terminal equipment, or the controller of the Mobile Earth Station (MES).
|
101 376-5-3
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 3: Channel Coding; GMR-1 05.003
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760503/01.02.01_60/ts_1013760503v010201p.pdf
|
The present document specifies the data blocks given to the encryption unit and the mapping onto the free bits of a burst. It includes the specifications for encoding, reordering, interleaving, and detailed mapping onto the burst. It does not specify the channel decoding method. The definition is given for each kind of logical channel, starting with the data provided to the channel encoder by the speech coder, the data terminal equipment, or the controller of the Mobile Earth Station (MES).
|
101 376-5-2
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 2: Multiplexing and Multiple Access; Stage 2 Service Description; GMR-1 3G 45.002
|
TS
|
3.5.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760502/03.05.01_60/ts_1013760502v030501p.pdf
|
The present document defines the structure of the physical channels for the radio subsystem in the GMR-1 3G Mobile Satellite System. It describes the GMR-1 3G concept of logical channels and the timing concepts of TDMA frames, timeslots, and bursts. It defines the relationship between logical and physical channels, and defines the logical channels in terms of size, structure and timing relationships.
|
101 376-5-2
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 2: Multiplexing and Multiple Access; Stage 2 Service Description; GMPRS-1 05.002
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760502/02.03.01_60/ts_1013760502v020301p.pdf
|
The present document defines the structure of the physical channels for the radio subsystem in the GMR-1 3G Mobile Satellite System. It describes the GMR-1 3G concept of logical channels and the timing concepts of TDMA frames, timeslots, and bursts. It defines the relationship between logical and physical channels, and defines the logical channels in terms of size, structure and timing relationships.
|
101 376-5-2
|
GEO-Mobile Radio Interface Specifications; Part 5: Radio interface physical layer specifications; Sub-part 2: Multiplexing and Multiple Access; Stage 2 Service Description; GMR-1 05.002
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760502/01.02.01_60/ts_1013760502v010201p.pdf
|
The present document defines the structure of the physical channels for the radio subsystem in the GMR-1 3G Mobile Satellite System. It describes the GMR-1 3G concept of logical channels and the timing concepts of TDMA frames, timeslots, and bursts. It defines the relationship between logical and physical channels, and defines the logical channels in terms of size, structure and timing relationships.
|
101 376-5-1
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 1: Physical Layer on the Radio Path: General Description; GMR-1 3G 45.001
|
TS
|
3.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760501/03.03.01_60/ts_1013760501v030301p.pdf
|
The present document is an introduction to the 05 series of technical specifications for the GMR-1 3G Mobile Satellite System. It is not of a mandatory nature, but consists of a general description of the organization of the physical layer with reference to the technical specifications where each part is specified in detail. It introduces furthermore, the reference configuration that will be used throughout this series of technical specifications. Finally, the present document introduces several characteristics of the mobile satellite operating environment, and summarizes several important properties of the physical layer that are developed in detail within the rest of the 45 series.
|
101 376-5-1
|
GEO-Mobile Radio Interface Specifications (Release 1); Part 5: Radio interface physical layer specifications; Sub-part 1: Physical Layer on the Radio Path: General Description; GMR-1 05.001
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760501/01.02.01_60/ts_1013760501v010201p.pdf
|
The present document is an introduction to the 05 series of technical specifications for the GMR-1 3G Mobile Satellite System. It is not of a mandatory nature, but consists of a general description of the organization of the physical layer with reference to the technical specifications where each part is specified in detail. It introduces furthermore, the reference configuration that will be used throughout this series of technical specifications. Finally, the present document introduces several characteristics of the mobile satellite operating environment, and summarizes several important properties of the physical layer that are developed in detail within the rest of the 45 series.
|
101 376-4-15
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 15: Packet Data Convergence Protocol (PDCP) specification; GMR-1 3G 25.323
|
TS
|
3.4.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760415/03.04.01_60/ts_1013760415v030401p.pdf
|
The present document provides the description of the GMR-1 3G Packet Data Convergence Protocol (PDCP).
|
101 376-4-14
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 14: Mobile Earth Station (MES) - Base Station System (BSS) interface; Radio Link Control/Medium Access Control (RLC/MAC) protocol; Iu Mode; GMR-1 3G 44.160
|
TS
|
3.4.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760414/03.04.01_60/ts_1013760414v030401p.pdf
| |
101 376-4-13
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 13: Radio Resource Control (RRC) protocol; Iu Mode; GMR-1 3G 44.118
|
TS
|
3.5.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760413/03.05.01_60/ts_1013760413v030501p.pdf
| |
101 376-4-12
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 12: Mobile Earth Station (MES) - Base Station System (BSS) interface; Radio Link Control/Medium Access Control (RLC/MAC) protocol; GMR-1 3G 44.060
|
TS
|
3.5.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760412/03.05.01_60/ts_1013760412v030501p.pdf
|
The present document specifies the procedures used at the radio interface (Reference Point Um, see ETSI TS 101 376-4-2 [6]) for the GMR-1 General Packet Radio Service (GMPRS-1) Medium Access Control/Radio Link Control (MAC/RLC) layer. The present document is applicable to the following GPRS Um functional layers: • Radio Link Control functions; • Medium Access Control functions; and • Physical Link Control functions. The procedures described in the present document are for the RLC/MAC functions of the GMPRS radio interface (Um) when operating on a Packet Data Channel (PDCH). The present document provides the overall description for RLC/MAC layer functions of the general Packet Radio Service (GMPRS) radio interface Um. ETSI TS 101 376-3-22 [5] contains an overview of the GPRS radio interface (Um). ETSI TS 101 376-4-3 [7] and ETSI TS 101 376-4-4 [8] contain the definition of the control channels used in the present document. ETSI TS 101 376-4-7 [10] contains a description in general terms of the structured functions and procedures of this protocol and the relationship of this protocol with other layers and entities. ETSI TS 101 376-4-8 [11] contains the definition of GMR-1 3G RLC/MAC procedures when operating on the Common Control Channel (CCCH). ETSI TS 101 351 [12] contains functional procedures for the Logical Link Control (LLC) layer. Application to interface structure The RLC/MAC procedures apply to the interface structures defined in ETSI TS 101 376-4-3 [7]. They use the functions and services provided by layer 1 defined in ETSI TS 101 376-4-4 [8]. ETSI TS 101 376-4-7 [10] gives the general description of layer 3 including procedures, messages format and error handling. Use of logical control channels The logical control channels are defined in ETSI TS 101 376-5-2 [13]. Two similar sets of logical channels are defined. The first set consists of the logical channels: • Broadcast Control Channel (BCCH): downlink only, used to broadcast Cell specific information; • Paging Channel (PCH): downlink only, used to send page requests to Mobile Earth Stations (MESs); • Random Access Channel (RACH): uplink only, used to request GPRS resources or a Dedicated Control Channel; • Access Grant Channel (AGCH): downlink only, used to allocate GPRS resources or a Dedicated Control Channel. The second set consists of the logical channels: • Packet Random Access Channel (PRACH): uplink only, used to request GPRS resources; • Packet Access Grant Channel (PAGCH): downlink only, used to allocate GPRS resources; • Packet Associated Control Channel (PACCH): bi-directional, associated with a Temporary Block Flow (TBF); • Packet Timing advance Control Channel Uplink (PTCCH/U): used to transmit Packet Normal bursts to allow estimation of the timing advance for one MES in transfer state; ETSI ETSI TS 101 376-4-12 V3.5.1 (2017-03) 16 GMR-1 3G 44.060 • Packet Timing advance Control Channel Downlink (PTCCH/D): used to transmit timing advance updates for several MES. One PTCCH/D is paired with several PTCCH/Us.
|
101 376-4-12
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 12: Mobile Earth Station (MES) - Base Station System (BSS) interface; Radio Link Control/Medium Access Control (RLC/MAC) protocol; GMPRS-1 04.060
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760412/02.03.01_60/ts_1013760412v020301p.pdf
|
The present document specifies the procedures used at the radio interface (Reference Point Um, see ETSI TS 101 376-4-2 [6]) for the GMR-1 General Packet Radio Service (GMPRS-1) Medium Access Control/Radio Link Control (MAC/RLC) layer. The present document is applicable to the following GPRS Um functional layers: • Radio Link Control functions; • Medium Access Control functions; and • Physical Link Control functions. The procedures described in the present document are for the RLC/MAC functions of the GMPRS radio interface (Um) when operating on a Packet Data Channel (PDCH). The present document provides the overall description for RLC/MAC layer functions of the general Packet Radio Service (GMPRS) radio interface Um. ETSI TS 101 376-3-22 [5] contains an overview of the GPRS radio interface (Um). ETSI TS 101 376-4-3 [7] and ETSI TS 101 376-4-4 [8] contain the definition of the control channels used in the present document. ETSI TS 101 376-4-7 [10] contains a description in general terms of the structured functions and procedures of this protocol and the relationship of this protocol with other layers and entities. ETSI TS 101 376-4-8 [11] contains the definition of GMR-1 3G RLC/MAC procedures when operating on the Common Control Channel (CCCH). ETSI TS 101 351 [12] contains functional procedures for the Logical Link Control (LLC) layer. Application to interface structure The RLC/MAC procedures apply to the interface structures defined in ETSI TS 101 376-4-3 [7]. They use the functions and services provided by layer 1 defined in ETSI TS 101 376-4-4 [8]. ETSI TS 101 376-4-7 [10] gives the general description of layer 3 including procedures, messages format and error handling. Use of logical control channels The logical control channels are defined in ETSI TS 101 376-5-2 [13]. Two similar sets of logical channels are defined. The first set consists of the logical channels: • Broadcast Control Channel (BCCH): downlink only, used to broadcast Cell specific information; • Paging Channel (PCH): downlink only, used to send page requests to Mobile Earth Stations (MESs); • Random Access Channel (RACH): uplink only, used to request GPRS resources or a Dedicated Control Channel; • Access Grant Channel (AGCH): downlink only, used to allocate GPRS resources or a Dedicated Control Channel. The second set consists of the logical channels: • Packet Random Access Channel (PRACH): uplink only, used to request GPRS resources; • Packet Access Grant Channel (PAGCH): downlink only, used to allocate GPRS resources; • Packet Associated Control Channel (PACCH): bi-directional, associated with a Temporary Block Flow (TBF); • Packet Timing advance Control Channel Uplink (PTCCH/U): used to transmit Packet Normal bursts to allow estimation of the timing advance for one MES in transfer state; ETSI ETSI TS 101 376-4-12 V3.5.1 (2017-03) 16 GMR-1 3G 44.060 • Packet Timing advance Control Channel Downlink (PTCCH/D): used to transmit timing advance updates for several MES. One PTCCH/D is paired with several PTCCH/Us.
|
101 376-4-11
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 11: Radio Link Protocol (RLP) for Data Services; GMR-1 04.022
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760411/01.01.01_60/ts_1013760411v010101p.pdf
|
The present document specifies the radio link protocol (RLP) for data transmission over radio interface of the GMR-1 Mobile Satellite System. RLP covers the Layer 2 functionality of the ISO OSI Reference Model (ISO/IEC 7498 [12]). RLP provides the OSI Data Link Service (ISO/IEC 8886 [14]) to its users. It is based on ideas contained in ISO/IEC 3309 [10], ISO/IEC 4335 [11] and ISO/IEC 7809 [13] (HDLC of ISO) as well as ITU-T Recommendations X.25 and Q.92x (LAP-B and LAP-D of ITU-T, resp.). RLP has been tailored to the special needs of digital radio transmission. The radio link protocol is similar to that described in GSM 04.22 [4]. However, for throughput and efficiency reasons, the RLP frame format used in RLP version 2 described in GSM 04.22 [5] shall be used for the GMR-1 mobile satellite system. RLP is intended for use with nontransparent data-transfer. Protocol conversion may be provided for a variety of protocol configurations. Those foreseen immediately are: • Character-mode protocols using start-stop transmission (IA5); • X.25 LAP-B. For reasons of better presentation, material about protocol conversion has been placed within those specifications concerned with the relevant terminal adapters, i.e., GMR-1 07.002 [3] for the asynchronous case. Care shall be taken that this material is also applied to Interworking Functions; see GSM 09.04 [6], GSM 09.05 [7], GSM 09.06 [8], and GSM 09.07 [9].
|
101 376-4-10
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 10: Rate Adaptation on the Access Terminal-Gateway Station Subsystem (MES-GSS) Interface; GMR-1 04.021
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760410/01.01.01_60/ts_1013760410v010101p.pdf
|
The present document defines the rate adaptation functions in the GMR-1 Mobile Satellite System for adapting terminal interface data rates to the MES-GSS interface data rates, in accordance with GSM 03.10 [7]. The present document is based on GSM 04.21 [8]. The provision of these functions will depend on the services a particular station is designed to support. NOTE: The present document should be considered together with GSM 08.20 [9] to give a complete description of satellite system rate adaptation.
|
101 376-4-9
|
GEO-Mobile Radio Interface Specifications; Part 4: Radio interface protocol specifications; Sub-part 9: Performance Requirements on the Mobile Radio Interface; GMR-1 04.013
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760409/01.01.01_60/ts_1013760409v010101p.pdf
|
The present document specifies measurable performance requirements for signalling aspects of mobile earth stations in the GMR-1 Mobile Satellite System. To allow implementation flexibility it has been chosen to specify requirements on the whole mobile station rather than to specify requirements on each "OSI layer". As a consequence, the performance requirements do not fit conveniently in specifications such as GMR-1 04.008 [5] (layer 3 only) or GMR-1 04.006 [4] (layer 2 only). The main aim of the present document is to provide the justification for testing of requirements that are not included in other GMR-1 specifications. Where specific requirements are included in other GMR-1 specifications they are not duplicated here. Mobile Earth Stations have to perform a wide variety of functions. As a consequence most performance measurements have to be made under a set of defined conditions: where necessary, these are included in the present document. Where necessary certain assumptions are made about the interaction times between the mobile equipment and the SIM. If the (test) SIM does not respond within the assumed time then appropriate allowances shall be made. Additionally, it is intended that the present document should contain sufficient requirements to enable some undefined network timers in GMR-1 04.008 [5] to be calculated.
|
101 376-4-8
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 8: Mobile Radio Interface Layer 3 Specifications; GMR-1 3G 44.008
|
TS
|
3.4.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760408/03.04.01_60/ts_1013760408v030401p.pdf
| |
101 376-4-8
|
GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 8: Mobile Radio Interface Layer 3 Specifications; GMPRS-1 04.008
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760408/02.03.01_60/ts_1013760408v020301p.pdf
| |
101 376-4-8
|
GEO-Mobile Radio Interface Specifications (Release 1); Part 4: Radio interface protocol specifications; Sub-part 8: Mobile Radio Interface Layer 3 Specifications; GMR-1 04.008
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760408/01.03.01_60/ts_1013760408v010301p.pdf
| |
101 376-4-7
|
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 7: Mobile Radio Interface Signalling Layer 3 General Aspects; GMR-1 3G 24.007
|
TS
|
3.3.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760407/03.03.01_60/ts_1013760407v030301p.pdf
|
The present document defines the architecture of Layer 3 and its sublayers on the GeoMobile (GMR-1) Air Interface. Most of the procedures defined for Layer 3 are similar to those defined in 3GPP system as defined in TS 124 007 [5]. Only significant differences are described here.
|
101 376-4-7
|
GEO-Mobile Radio Interface Specifications (Release 2) General Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 7: Mobile Radio Interface Signalling Layer 3 General Aspects; GMPRS-1 04.007
|
TS
|
2.2.1
|
http://www.etsi.org/deliver/etsi_ts/101300_101399/1013760407/02.02.01_60/ts_1013760407v020201p.pdf
|
The present document defines the architecture of Layer 3 and its sublayers on the GeoMobile (GMR-1) Air Interface. Most of the procedures defined for Layer 3 are similar to those defined in 3GPP system as defined in TS 124 007 [5]. Only significant differences are described here.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.